Thermal conductivity enhancement of alumina/silicone rubber composites through constructing a thermally conductive 3D framework

被引：0
作者：
Jianan Song
Lei Wu
Yong Zhang
机构：
[1] Shanghai Jiao Tong University,School of Chemistry and Chemical Engineering, State Key Laboratory for Metal Matrix Composite Materials
来源：
Polymer Bulletin | 2020年 / 77卷
关键词：
Thermal conductivity; Silicone rubber; 3D framework; Foaming and infiltrating;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Thermally conductive and electrically insulating polymer composites are in great demand for the heat management of modern electronics. Herein, a novel method consisting of the foaming and subsequent infiltrating processes is developed to construct a thermally conductive 3D framework in silicone rubber (SR) for enhancing the thermal conductivity. The thermal conductivity of an alumina (Al2O3)/SR composite with a 3D framework (3D-Al2O3/SR) reaches 0.747 W/(m K) at 32.6 wt% Al2O3 loading, much higher than that of the corresponding Al2O3/SR composite with randomly dispersed Al2O3. This difference can be attributed to the effective thermally conductive 3D network fabricated by foaming and the strong interfacial adhesion between the framework and SR matrix. The volume electrical resistivity of the 3D-Al2O3/SR composite at 32.6 wt% Al2O3 loading is 2.12 × 1014 Ω cm, indicating its good electrical insulation. This method is facile, versatile and of low cost, which could pave the way for designing and preparing high-performance polymer composites used for heat dissipation.
引用
收藏
页码：2139 / 2153
页数：14
相关论文
共 254 条
  • [1] Li X(2016)Enhanced thermal-conductive and anti-dripping properties of polyamide composites by 3D graphene structures at low filler content Compos Part A 88 305-314
  • [2] Shao L(2015)Tuning of thermal and dielectric properties for epoxy composites filled with electrospun alumina fibers and graphene nanoplatelets through hybridization J Mater Chem C 3 7195-7202
  • [3] Song N(2011)Characterisation of graphite nanoplatelets and the physical properties of graphite nanoplatelet/silicone composites for thermal interface applications Carbon 49 4269-4279
  • [4] Shi L(2016)Thermal conductivity of polymer-based composites: fundamentals and applications Prog Polym Sci 59 41-85
  • [5] Ding P(2017)Thermal conductivity enhancement of poly(3-hydroxylbutyrate) composites by constructing segregated structure with the aid of poly(ethylene oxide) Compos Sci Technol 149 185-191
  • [6] Zha JW(2015)Enhanced thermal conductivity and retained electrical insulation for polyimide composites with SiC nanowires grown on graphene hybrid fillers Compos Part A 76 73-81
  • [7] Zhu TX(2017)A facile method to prepare flexible boron nitride/poly(vinyl alcohol) composites with enhanced thermal conductivity Compos Sci Technol 149 41-47
  • [8] Wu YH(2016)Review of thermal conductivity in composites: mechanisms, parameters and theory Prog Polym Sci 61 1-28
  • [9] Wang SJ(2014)Conductive polymer composites with segregated structures Prog Polym Sci 39 1908-1933
  • [10] Li RKY(2017)Learning from natural nacre: constructing layered polymer composites with high thermal conductivity ACS Appl Mater Interfaces 9 33001-33010
12345678910