Structural build-up of rigid fiber reinforced cement-based materials

被引:0
作者
A. Perrot
T. Lecompte
P. Estellé
S. Amziane
机构
[1] Université de Bretagne Sud,Laboratoire d’Ingénierie des Matériaux de Bretagne, Université Européenne de Bretagne—Centre de Recherche Christiaan Huygens
[2] Université de Rennes 1,Laboratoire de Génie Civil et de Génie Mécanique
[3] Université Européenne de Bretagne,Laboratoire de Mécanique et Ingénieries
[4] Clermont Université,undefined
[5] Université Blaise Pascal,undefined
[6] EA 3867,undefined
来源
Materials and Structures | 2013年 / 46卷
关键词
Rigid fibers; Structural build-up; Rheology; Concrete;
D O I
暂无
中图分类号
学科分类号
摘要
The structural build-up of rigid fiber reinforced cement-based materials is studied. It has recently been shown that the behaviour of fiber reinforced concrete depends on the orientation of the fibers that has to be optimized during casting. As a result, there is a great interest to study the rheology of fiber reinforced concrete. One of the most important characteristics of modern fresh concretes is the structural build-up which is involved in many recent issues of concrete casting. This characteristic depends on the cement pastes chemical activity. This present work shows that structural build-up modelling used for common concretes can be generalized to fiber reinforced concretes. It can be shown that, if the inclusions percolation threshold is not reached, the structural build-up rate Athix is amplified by the addition of fibers and aggregates. Finally, this amplification of the structuration is estimated using modelling initially developed for spherical inclusions and aggregates.
引用
收藏
页码:1561 / 1568
页数:7
相关论文
共 144 条
  • [1] Altun F(2007)Effects of steel fiber addition on mechanical properties of concrete and RC beams Constr Build Mater 21 654-661
  • [2] Haktanir T(2008)A novel settling and structural build-up measurement method Meas Sci Technol 19 105702-1671
  • [3] Ari K(2010)Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material Constr Build Mater 24 1664-14
  • [4] Amziane S(2012)Influence of yield stress and compressive strength on direct shear behaviour of steel fibre-reinforced concrete Constr Build Mater 27 6-506
  • [5] Perrot A(2008)Homogenization approach to the behavior of suspensions of noncolloidal particles in yield stress fluids J Rheol 52 489-491
  • [6] Lecompte T(2010)Mechanical properties of steel fibre reinforced concrete exposed at high temperatures Mater Struct 43 475-1281
  • [7] Boulekbache B(2009)Fibre reinforced concrete: new design perspectives Mater Struct 42 1261-971
  • [8] Hamrat M(2007)A method for mix-design of fiber-reinforced self-compacting concrete Cem Concr Res 37 957-128
  • [9] Chemrouk M(2011)High mechanical performance of fibre reinforced cementitious composites: the role of casting-flow induced fibre orientation Mater Struct 44 109-598
  • [10] Amziane S(2012)A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites. Part 2: correlation to tensile fracture toughness Mater Struct 45 591-589