Reverse martensitic transformation in the Cu-10 wt% Al-6 wt%Ag alloy

被引：0
|
作者：
A. T. Adorno
R. A. G. Silva
机构：
[1] Instituto de Química-Unesp,Departamento de Físico
来源：
Journal of Materials Science | 2005年 / 40卷
关键词：
Polymer; Microscopy; Electron Microscopy; Scanning Electron Microscopy; Thermal Analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The reverse martensitic transformation in the Cu-10 wt%Al-6 wt%Ag alloy was studied by classical differential thermal analysis (DTA), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and X-ray diffractometry (XRD). The results indicated that the presence of Ag in the Cu-10%Al alloy is responsible for the separation of the competitive reactions that occur during the reverse martensitic transformation and is also associated to an increase in the disordering degree at high temperatures, when compared with alloys without Ag addition.
引用
收藏
页码：6217 / 6221
页数：4
相关论文
共 32 条
  • [1] Effect of Ag additions on the β phase formation reaction in the Cu-9 wt.%Al-6 wt.%Mn alloy
    Adorno, A. T.
    Carvalho, T. M.
    Silva, R. A. G.
    Santos, C. M. A.
    Magdalena, A. G.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : S275 - S279
  • [2] Microstructural characterization of precipitates in Cu-10 wt.%Al-0.8 wt.%Be shape-memory alloy
    Kuo, H. H.
    Wang, W. H.
    Hsu, Y. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 430 (1-2): : 292 - 300
  • [3] Ag precipitation and dissolution reactions in the Cu-3 wt.% Al-4 wt.% Ag alloy
    Adorno, A. T.
    Silva, R. A. G.
    Neves, T. B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 441 (1-2): : 259 - 265
  • [4] Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy
    Liveric, Lovro
    Grguric, Tamara Holjevac
    Mandic, Vilko
    Chulist, Robert
    MATERIALS, 2023, 16 (17)
  • [5] Interconnection between microstructure and microhardness of directionally solidified binary Al-6wt.%Cu and multicomponent Al-6wt.%Cu-8wt.% Si alloys
    Vasconcelos, Angela J.
    Kikuchi, Rafael H.
    Barros, Andre S.
    Costa, Thiago A.
    Dias, Marcelino
    Moreira, Antonio L.
    Silva, Adrina P.
    Rocha, Otavio L.
    ANAIS DA ACADEMIA BRASILEIRA DE CIENCIAS, 2016, 88 (02): : 1099 - 1111
  • [6] Mechanical Properties, Thermal Properties and Microstructure of Heat-Treated Al-Zn-Mg-x%Cu (0.02 wt% Cu and 0.89 wt% Cu) Alloy
    Patel, Nikunj
    Pradhan, Ajaya Kumar
    INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (04) : 3104 - 3114
  • [7] Recovery of the mechanical properties on the Al-4wt%Cu alloy
    Chemingui, M.
    Kassis, K.
    Khitouni, M.
    Masmoudi, J.
    Kolsi, A. W.
    2ND INTERNATIONAL CONFERENCE ON MATERIALS PHYSICS AND APPLICATIONS (JIPMA 2009/MATERIAUX 2009), 2010, 13
  • [8] Effect of titanium diboride ceramic particles on mechanical and wear behaviour of Cu-10 wt% W alloy composites processed by P/M route
    Stalin, B.
    Ravichandran, M.
    Sudha, G. T.
    Karthick, A.
    Prakash, K. Soorya
    Asirdason, A. Benjamin
    Saravanan, S.
    VACUUM, 2021, 184
  • [9] Properties of rare earth added Cu-12wt%Al-3wt%Ni-0.6wt%Ti high temperature shape memory alloy
    Dalvand, Pegah
    Raygan, Shahram
    Lopez, Gabriel A.
    Melendez, Mariano B.
    Chernenko, Volodymyr A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 754 : 370 - 381
  • [10] Influence of silver additions on the Cu-13 wt pct Al alloy hardness.
    deArruda, GJ
    Adorno, AT
    Beatrice, CRS
    Cilense, M
    ECLETICA QUIMICA, 1996, 21 : 103 - 110
1234