High-temperature synthesis of cast Cr2AlC at an inert gas overpressure

被引：0
作者：
P. A. Miloserdov
V. A. Gorshkov
V. I. Yukhvid
机构：
[1] Russian Academy of Sciences,Institute of Structural Macrokinetics and Materials Science
来源：
Inorganic Materials | 2013年 / 49卷
关键词：
Spark Plasma Sinter; Self Propagate High Temperature Synthesis; Combustion Velocity; Chromium Carbide; Self Propagate High Temperature Synthesis Process;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper reports the high-temperature synthesis of cast Cr2AlC from mixtures of chromium(III) oxide, chromium(VI) oxide, aluminum, and carbon at an increased inert gas (Ar or N) pressure in a 3-L self-propagating high-temperature synthesis reactor at an initial argon pressure pi = 5 MPa. The reaction products were characterized by X-ray diffraction and X-ray microanalysis. The results indicate that the ingots obtained under optimized conditions consisted of Cr2AlC and Cr3C2 with a ratio of about 85 : 15.
引用
收藏
页码：781 / 785
页数：4
相关论文
共 44 条
[21]   Production of low-porosity products by forced self-propagating high-temperature synthesis-compaction [J].
V. K. Smolyakov .
Combustion, Explosion and Shock Waves, 1998, 34 :405-410
[22]   Participation of gases in the surface formation during self-propagating high-temperature synthesis of porous nickel titanium [J].
Yu. F. Yasenchuk ;
N. V. Artyukhova ;
V. A. Novikov ;
V. E. Gyunter .
Technical Physics Letters, 2014, 40 :697-700
[23]   Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique [J].
Weibing Zhou ;
Bingchu Mei ;
Jiaoqun Zhu ;
Xiaolin Hong .
Journal of Materials Science, 2005, 40 :2099-2100
[24]   Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique [J].
Zhou, WB ;
Me, BC ;
Zhu, JQ ;
Hong, XL .
JOURNAL OF MATERIALS SCIENCE, 2005, 40 (08) :2099-2100
[25]   Preparation of WC and W2C by self-propagating high-temperature synthesis using a mixture of tungsten, titanium, and carbon black powders [J].
V. A. Poluboyarov ;
A. A. Zhdanok ;
Z. A. Korotaeva ;
V. A. Kuznetsov .
Inorganic Materials, 2014, 50 :469-472
[26]   Self-propagating high-temperature synthesis of Y2O3 powders from Y(NO3)3x(CH3COO)3(1 − x) · nH2O [J].
S. S. Balabanov ;
E. M. Gavrishchuk ;
A. M. Kut’in ;
D. A. Permin .
Inorganic Materials, 2011, 47 :484-488
[27]   Nonisothermal method for calculating the mold equipment of an apparatus for compacting the hot products of self-propagating high-temperature synthesis [J].
L. S. Stelmakh ;
A. M. Stolin ;
D. S. Dvoretskii .
Theoretical Foundations of Chemical Engineering, 2010, 44 :192-200
[28]   Electrical and thermomechanical properties of materials based on nonstoichiometric titanium carbide prepared by self-propagating high-temperature synthesis [J].
A. M. Shul’pekov ;
G. V. Lyamina .
Inorganic Materials, 2011, 47 :722-727
[29]   Fabrication of Ni-Ti Alloy by Self-Propagating High-Temperature Synthesis and Spark Plasma Sintering Technique [J].
Pavel Salvetr ;
Tomáš František Kubatík ;
Damien Pignol ;
Pavel Novák .
Metallurgical and Materials Transactions B, 2017, 48 :772-778
[30]   Low temperature synthesis of chromium carbide (Cr3C2) nanopowders by a novel precursor method [J].
Zhao, Zhiwei ;
Zheng, Hongjuan ;
Liu, Shaojing ;
Shen, Jianhong ;
Song, Weiqiang ;
Chen, Jinshen .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :46-50
12345