Thermal properties from membrane of polyamide 6/montmorillonite clay nanocomposites obtained by immersion precipitation method

被引：0
作者：
A. M. D. Leite
L. F. Maia
R. A. Paz
E. M. Araújo
H. L. Lira
机构：
[1] Universidade Federal de Campina Grande,Departamento de Engenharia de Materiais
来源：
Journal of Thermal Analysis and Calorimetry | 2009年 / 97卷
关键词：
Polyamide 6; Membranes; Nanocomposites;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of this work was to obtain membranes from polyamide 6/montmorillonite clay nanocomposites through the phase inversion technique. The nanocomposites and membranes from polyamide 6/montmorillonite clay were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetry (TG) and Differential Scanning Calorimetry (DSC). Microporous and asymmetric membranes were successfully obtained from nanocomposites and the results showed that the salts were incorporated by intercalation between the organoclay layers and, apparently that the nanocomposites and membranes were thermally more stable than the pure polyamide.
引用
收藏
页码：577 / 580
页数：3
相关论文
共 50 条
  • [41] Polyamide 6/Multiwalled Carbon Nanotubes Nanocomposites with Modified Morphology and Thermal Properties
    Mahmood, Nasir
    Islam, Mohammad
    Hameed, Asad
    Saeed, Shaukat
    POLYMERS, 2013, 5 (04) : 1380 - 1391
  • [42] Rheological, Mechanical, Optical, and Transport Properties of Blown Films of Polyamide 6/Residual Monomer/Montmorillonite Nanocomposites
    Beatrice, Cesar A. G.
    Branciforti, Marcia C.
    Alves, Rosa M. V.
    Bretasi, Rosario E. S.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 116 (06) : 3581 - 3592
  • [43] Oxygen barrier and blending properties of blown films of blends of modified polyamide and polyamide-6 clay mineral nanocomposites
    Yeh, Jen-Taut
    Chang, Chang-Jung
    Tsai, Fang-Chang
    Chen, Kan-Nan
    Huang, Kuo-Shien
    APPLIED CLAY SCIENCE, 2009, 45 (1-2) : 1 - 7
  • [44] Properties of polyamide 6/clay nanocomposites processed by low cost bentonite and different organic modifiers
    Garcia-Lopez, D.
    Gobernado-Mitre, I.
    Fernandez, J. F.
    Merino, J. C.
    Pastor, J. M.
    POLYMER BULLETIN, 2009, 62 (06) : 791 - 800
  • [45] Comparison of polyamide-6 nanocomposites based on pristine and organic montmorillonite obtained via anionic ring-opening polymerization
    Liu, Andong
    Xie, Tingxiu
    Yang, Guisheng
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2006, 207 (13) : 1174 - 1181
  • [46] Gas permeation, thermal, morphology and mechanical properties of polyimide/clay nanocomposites: Effect of organically modified montmorillonite
    Esmaielzadeh, Sheida
    Ahmadizadegan, Hashem
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2024, 37 (01) : 363 - 386
  • [47] Investigation of thermal and mechanical properties of polybenzoxazine obtained in an in situ polymerization with surface-modified montmorillonite clay
    Sundaramoorthy, Malathi Devi
    Durairajan, Madhavan
    Kadarkaraithangam, Jeyasubramanian
    Palani, Vallinayagam
    POLYMER COMPOSITES, 2022, 43 (10) : 7232 - 7247
  • [48] Fabrication of Nylon 6-Montmorillonite Clay Nanocomposites with Enhanced Structural and Mechanical Properties by Solution Compounding
    Abdel-Gawad, Ahmed M.
    Ramadan, Adham R.
    Flores, Araceli
    Esawi, Amal M. K.
    POLYMERS, 2022, 14 (21)
  • [49] Microporous Membranes from Polyamide6/National Clay Nanocomposites. Part 2: Microstructural and Permeability Evaluation
    Leite, Amanda M. D.
    Araujo, Edcleide M.
    Lira, Hello de L.
    da Paz, Rene Anisio
    Medeiros, Vanessa da Nobrega
    POLIMEROS-CIENCIA E TECNOLOGIA, 2014, 24 (01): : 72 - 79
  • [50] Morphology, thermal and mechanical properties of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites from organic-modified montmorillonite
    Cai, Yibing
    Hu, Yuan
    Xiao, Junfeng
    Song, Lei
    Fan, Weicheng
    Deng, Huaxia
    Gong, Xinglong
    Chen, Zuyao
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2007, 46 (05) : 541 - 548
12345