Diffusible hydrogen content in rutile flux-cored arc welds as a function of the welding parameters

被引：0

作者：

Pitrun M. ^{[1
]}

Nolan D. ^{[1
]}

Dunne D. ^{[1
]}

机构：

[1] University of Wollongong,

来源：

Welding in the World | 2004年 / 48卷 / 1-2期

关键词：

Arc welding; Argon; CO[!sub]2[!/sub; CO[!sub]2[!/sub] welding; Cored filler wire; Current; Electric arcs; FCA welding; GMA welding; GMMA welding; Hydrogen; Influencing factors; Length; Metal transfer; Mixtures; Process parameters; Shielding gases; Stick out;

D O I：

10.1007/BF03266408

中图分类号：

学科分类号：

摘要：

The objective of the current work was to establish the effect of flux-cored arc welding (FCAW) parameters, such as welding current, contact-tip to workpiece distance (CTWD) and shielding gas type, on diffusible hydrogen content for single run, horizontal position, bead-on-plate welds using seamed and seamless rutile consumable wires. The work included an investigation of arc characteristics under typical welding conditions, using high-speed digital imaging and laser backlighting, in order to provide information on metal transfer and arc length. The work has shown that under most conditions investigated, the hydrogen levels for the seamed rutile wire were above the 10 ml/100 g specified by the consumable's classification (H10). In contrast, the seamless wire met the requirements of the H5 classification for all welding conditions investigated. In general, lower diffusible hydrogen levels were achieved when using CO2 shielding gas, although the effect is less significant with the H5 seamless rutile wire. It is further concluded that the time that the wire resides in the resistive heating zone, tRHZ, and the arc length are important factors in determining diffusible hydrogen content.

引用

页码：2 / 13

页数：11

共 34 条

[11]

Sierdzinski M.S., Ferree S.E., New flux cored wires control diffusible hydrogen levels, Welding Journal, pp. 45-48, (1998)

[12]

Kurokawa T., Nagaoka S., Hashimoto T., Characteristics of newly developed flux-cored wire for mild and high tensile strength steels, Kobelco Technology Review, 21, pp. 30-34, (1988)

[13]

Quintana M.A., Kotecki D.J., Achievements and perspectives for the new millennium, IIW Annual Assembly, (2000)

[14]

Evans G.M., Baach H., Hydrogen content of welds, Metal Construction, pp. 508-511, (1975)

[15]

Pitrun M., Davidson J.L., Kenny C.J., Wittke P.J., Cornish N., Factors affecting the hydrogen content of weld metal deposited by flux cored arc welding consumables, Australian Welding Journal, 46, pp. 33-48, (2001)

[16]

Lee H.W., Kang S.W., Um D.S., A study on transverse weld cracks in thick steel plate with the FCAW process, Welding Journal, (1998)

[17]

Pargeter R.J., Effects of arc energy, plate thickness and preheat on C-Mn steel weld metal hydrogen cracking, TWI Report, 461, (1992)

[18]

Konkol P.J., Warren J.L., Hebert P.A., Weldability of HSLA-65 steel for ship structures, Welding Journal, (1998)

[19]

Kuebler R., Pitrun M., Pitrun I., The effect of welding parameters and hydrogen levels on the weldability of high strength Q&T steel welded with FCAW consumables, Australian Welding Journal, 45, pp. 38-47, (2000)

[20]

Visman V., Weld Metal HACC in Thick Section, Low Strength Multipass FCAW, (2002)

← 1 2 3 4 →