Reliability of composite solder bumps produced by an in-situ process

被引：0
|
作者：
Jong-Hyun Lee
Daejin Park
Jong-Tae Moon
Yong-Ho Lee
Dong Hyuk Shin
Yong-Seog Kim
机构：
[1] Hong Ik University,Department of Metallurgy and Materials Science
[2] Hyundai Electronics Ind.,Device and Semiconductor Res. Div.
[3] Hanyang University,Department of Metallurgy and Materials Science
来源：
Journal of Electronic Materials | 2000年 / 29卷
关键词：
In-situ composite; Cu; Sn; dispersoid; thermal stability; reaction rate; shear strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In an attempt to develop a thermally stable solder system, an in-situ Pb-Sn solder composite reinforced with Cu6Sn5 dispersoids was investigated for its thermal stability. The stability was evaluated mainly by measuring the growth rate of intermetallics at in-situ composite solder/BLM interface as a function of the number of reflow soldering cycles and aging time. The rates were compared with those of the eutectic Pb-Sn and Sn-Ag solders. After the thermal treatments, the solder joints were tested for their shear strengths. The results indicated that the in-situ composite solder has a higher shear strength and better thermal stability than the eutectic Pb-Sn solder.
引用
收藏
页码：1264 / 1269
页数：5
相关论文
共 50 条
  • [31] CHARACTERIZATION OF IN-SITU AA 6060/AlB2 METAL MATRIX COMPOSITE
    Dragut, Dumitru-Valentin
    Moldovan, Petru
    Butu, Mihai
    Usurelu, Emilia
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2011, 73 (04): : 161 - 170
  • [32] FRACTURE INITIATION AND PROPAGATION IN IN-SITU TiAl MATRIX COMPOSITE REINFORCED WITH CARBIDE PARTICLES
    Pelachova, Tatiana
    Lapin, Juraj
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1333 - 1338
  • [33] Structure characteristics and crystallography of LaB6-ZrB2 in-situ composite
    Chen, CM
    Zhou, WC
    Zhang, LT
    PROGRESS IN NATURAL SCIENCE, 1998, 8 (01) : 74 - 78
  • [34] Preparation and Characterization of Cu Coated SiC Composite Powders by in-situ Chemical Deposition
    Shi Jin-Gang
    Yao Hui
    Chen Ming-Hai
    Liu Ning
    Li Qing-Wen
    JOURNAL OF INORGANIC MATERIALS, 2012, 27 (08) : 795 - 799
  • [35] Structure characteristics and crystallography of LaB6-ZrB2 in-situ composite
    陈昌明
    周万城
    张立同
    ProgressinNaturalScience, 1998, (01) : 75 - 79
  • [36] Study on brazing WC-6Co/In718 with in-situ synthesis of Ni/Cu/AgCuNiMn solder
    Liu, Pan
    Zhong, Sujuan
    Pei, Yinyin
    Zhang, Guanxing
    Mo, Guidong
    Wang, Guoxin
    MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (16) : 2456 - 2463
  • [37] In-situ synergistic effect of Pr and Al2O3 nanoparticles on enhancing thermal cycling reliability of Sn-0.3Ag-0.7Cu/Cu solder joint
    Wu, Jie
    Xue, Songbai
    Huang, Guoqiang
    Sun, Huabin
    Chi, Fengfeng
    Yang, Xiaolei
    Xu, Yong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 905
  • [38] The Fabrication of Ni-MWCNT Composite Solder and Its Reliability Under High Relative Humidity and Temperature
    Lee, Choong-Jae
    Min, Kyung Deuk
    Jeong, Haksan
    Hwang, Byeong-Uk
    Jung, Seung-Boo
    JOURNAL OF ELECTRONIC MATERIALS, 2020, 49 (11) : 6746 - 6753
  • [39] A novel chemical additive for in-situ recovery of heavy oil using waterflooding process
    Mohammadzadeh, Omid
    Chatzis, Ioannis
    Giesy, John P.
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2015, 135 : 484 - 497
  • [40] In-situ composite Cu-Cr contact cables with high strength and high conductivity
    PENG Liming
    RareMetals, 2002, (01) : 62 - 66
12345