Reliability of composite solder bumps produced by an in-situ process

被引：0
|
作者：
Jong-Hyun Lee
Daejin Park
Jong-Tae Moon
Yong-Ho Lee
Dong Hyuk Shin
Yong-Seog Kim
机构：
[1] Hong Ik University,Department of Metallurgy and Materials Science
[2] Hyundai Electronics Ind.,Device and Semiconductor Res. Div.
[3] Hanyang University,Department of Metallurgy and Materials Science
来源：
Journal of Electronic Materials | 2000年 / 29卷
关键词：
In-situ composite; Cu; Sn; dispersoid; thermal stability; reaction rate; shear strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In an attempt to develop a thermally stable solder system, an in-situ Pb-Sn solder composite reinforced with Cu6Sn5 dispersoids was investigated for its thermal stability. The stability was evaluated mainly by measuring the growth rate of intermetallics at in-situ composite solder/BLM interface as a function of the number of reflow soldering cycles and aging time. The rates were compared with those of the eutectic Pb-Sn and Sn-Ag solders. After the thermal treatments, the solder joints were tested for their shear strengths. The results indicated that the in-situ composite solder has a higher shear strength and better thermal stability than the eutectic Pb-Sn solder.
引用
收藏
页码：1264 / 1269
页数：5
相关论文
共 50 条
  • [1] Reliability of composite solder bumps produced by an in-situ process
    Lee, JH
    Park, D
    Moon, JT
    Lee, YH
    Shin, DH
    Kim, YS
    JOURNAL OF ELECTRONIC MATERIALS, 2000, 29 (10) : 1264 - 1269
  • [2] Microstructure of a lead-free composite solder produced by an in-situ process
    Seong-Yong Hwang
    Joo-Won Lee
    Zin-Hyoung Lee
    Journal of Electronic Materials, 2002, 31 : 1304 - 1308
  • [3] Electromigration of Composite Sn-Ag-Cu Solder Bumps
    Sharma, Ashutosh
    Xu, Di Erick
    Chow, Jasper
    Mayer, Michael
    Sohn, Heung-Rak
    Jung, Jae Pil
    ELECTRONIC MATERIALS LETTERS, 2015, 11 (06) : 1072 - 1077
  • [4] Preparation of Sn-Ag-In ternary solder bumps by electroplating in sequence and reliability
    Wang Dongliang
    Yuan Yuan
    Luo Le
    JOURNAL OF SEMICONDUCTORS, 2011, 32 (08)
  • [5] Preparation of Sn-Ag-In ternary solder bumps by electroplating in sequence and reliability
    王栋良
    袁媛
    罗乐
    半导体学报, 2011, 32 (08) : 27 - 32
  • [6] Quasi in-situ observation of Ni-plated solder from various fracture mechanism using EBSD
    Wang, Chengqian
    Luo, Keyu
    He, Peng
    Zhou, Hongzhi
    Li, Rongqing
    Zhang, Zhihao
    Yu, Daquan
    Zhang, Shuye
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 1875 - 1881
  • [7] Infiltration behavior of in-situ TiC-Al composite by dipping process
    Song, IH
    Hahn, YD
    Kim, HD
    Kim, DK
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2779 - 2782
  • [8] In-situ aluminum matrix composite produced by friction stir processing using FE particles
    Khorrami, M. Sarkari
    Samadi, S.
    Janghorban, Z.
    Movahedi, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 641 : 380 - 390
  • [9] The Evolution of IMCs' Morphologies and Types in SAC and SAC plus Solder Bumps during Thermal Shock Process
    Zhong, Ying
    Wang, Chun Qing
    Caers, J. F. J. M.
    Zhao, Xiujuan
    14TH INTERNATIONAL CONFERENCE ON ELECTRONIC MATERIALS AND PACKAGING (EMAP 2012), 2012,
  • [10] A Reliability Study of Nanoparticles Reinforced Composite Lead-Free Solder
    Chen, Si
    Zhang, Lili
    Liu, Johan
    Gao, Yulai
    Zhai, Qijie
    MATERIALS TRANSACTIONS, 2010, 51 (10) : 1720 - 1726
12345