Squeeze-film damping of circular microplates vibrating in a tilting motion

被引:0
作者
Yuming Fang
Pu Li
Fan Yang
Wanli Zuo
机构
[1] Nanjing University of Posts and Telecommunications,College of Electronic Science and Engineering
[2] Southeast University,School of Mechanical Engineering
来源
Microfluidics and Nanofluidics | 2016年 / 20卷
关键词
Squeeze-film damping; Circular microplate; Perforated microplate; Microresonators;
D O I
暂无
中图分类号
学科分类号
摘要
Accurate determination of squeeze-film damping (SFD) plays an important role in the design of high-Q microresonators. Many analytical models for predicting SFD on the microplate vibrating in a tilting motion have been well established in the past. However, most of the previous works focused on the rectangular torsion microplates. There are few analytical models for the SFD on the circular microplate vibrating in the tilting motion. Only one model was developed by Xia et al. (Microfluid Nanofluid 19:585–593, 2015). However, the gas in the air gap was treated as an incompressible gas in their model, and the perforation effect was not considered. This paper first studies the SFD on a non-perforated circular microplate vibrating in the tilting motion. The effects of both gas compressibility and rarefaction are considered in a modified Reynolds equation. The air pressure under the circular microplate is approximated by using Bessel series. A more accurate analytical expression for the damping and spring constants has been developed. Then, the model for the non-perforated microplates is extended to include the perforation effect. The present models are validated by comparison of the numerical results obtained by finite element method over a wide range of frequency and perforation ratios.
引用
收藏
相关论文
共 68 条
[1]  
Andrews MK(1993)A comparison of squeeze-film theory with measurements on a microstructure Sens Actuators A 36 79-87
[2]  
Harris I(2007)Squeeze film air damping in MEMS Sens Actuators A 136 3-27
[3]  
Turner G(2003)Modified Reynolds’ equation and analytical analysis of squeeze-film air damping of perforated structures J Micromech Microeng 23 795-800
[4]  
Bao M(2006)Squeeze-film air damping of a torsion mirror at a finite tilting angle J Micromech Microeng 16 2330-2335
[5]  
Yang H(2002)Squeeze film damping effect on a MEMS torsion mirror J Micromech Microeng 12 556-561
[6]  
Bao M(2004)Tilt-angle stabilization of electrostatically actuated micromechanical mirrors beyond the pull-in point J Microelectromech Syst 13 988-997
[7]  
Yang H(1998)Compact analytical modeling of squeeze film damping with arbitrary venting conditions using a Green’s function approach Sens Actuators A 70 32-41
[8]  
Sun Y(2015)An analytical model for squeeze-film damping of perforated torsional microplates resonators Sensors 15 7388-7411
[9]  
Wang Y(2014)Analytical modeling of squeeze-film damping for perforated circular microplates J Sound Vib 333 2688-2700
[10]  
French PJ(2005)Damping of a micro-resonator torsion mirror in rarefied gas ambient J Micromech Microeng 15 1762-1769