Relationships between ground motion parameters and energy demands for regular low-rise RC frame buildings

The present study aims to analyze the correlation between ground motion parameters and energy demands of low-rise RC buildings without shear walls. Two regular 4- and 7-story residential buildings were seismically designed to represent low-rise RC buildings. In order to establish the requirements of single degree of freedom (SDOF) systems as well as multi degree of freedom (MDOF) systems, the dynamic features of “equivalent” SDOF systems were defined by using MDOF systems. The correlation of 20 ground motion parameters (GMPs) of 44 records with the energy demands obtained from a total of 176 nonlinear time history analyses was examined for the SDOF and MDOF systems within the scope of this study. The ground motion parameters (GMPs) were taken as intensity measures (IMs). In contrast, maximum input energy was used as a demand measure (DM) and these energy values were normalized with the masses of the buildings for cases, where the buildings were evaluated together. Parameters related to acceleration and velocity are generally found to yield better results in comparison to the ones related to frequency and displacement. Velocity Spectrum Intensity (VSI) and Arias Intensity (Ia) were obtained to have the highest correlation values as a single parameter. This study suggested new equations by combining multiple ground motion parameters for SDOF and MDOF systems to better reflect damage potential than a single parameter. The use of multiple parameters in combination results in better correlation coefficients.