Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures

被引：0
|
作者：
Anish Karmakar
S. Sivaprasad
S. Kundu
Debalay Chakrabarti
机构：
[1] Indian Institute of Technology (I.I.T.),Department of Metallurgical and Materials Engineering
[2] Council of Scientific and Industrial Research (CSIR-NML),Materials Science and Technology Division, National Metallurgical Laboratory
[3] Tata Steel,Product Research Group, Research and Development
来源：
Metallurgical and Materials Transactions A | 2014年 / 45卷
关键词：
Ferrite; Martensite; Carbide Particle; Uniform Elongation; Martensitic Island;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ferrite-carbide and ferrite-martensite dual-phase microstructures have been produced in a low-carbon steel with different ferrite grain structures such as, uniform distribution of coarse- and very fine-ferrite grains, and bimodal distribution of ferrite grain sizes comprising of coarse grains (~12 μm) and very fine grains (<2 μm). Very fine-grained dual-phase structure offered the best combination of tensile-strength and ductility among all the samples. The above microstructures have been compared in terms of their strain-hardening rate and the mechanism of plastic deformation.
引用
收藏
页码：1659 / 1664
页数：5
相关论文
共 50 条
  • [31] On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels
    Marion Calcagnotto
    Dirk Ponge
    Dierk Raabe
    Metallurgical and Materials Transactions A, 2012, 43 : 37 - 46
  • [32] The effect of new ferrite content on the tensile fracture behaviour of dual phase steels
    M. Erdogan
    Journal of Materials Science, 2002, 37 : 3623 - 3630
  • [33] Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel
    Chakraborty, Arnab
    Adhikary, Manashi
    Venugopalan, T.
    Singh, Virender
    Nanda, Tarun
    Kumar, B. Ravi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 676 : 463 - 473
  • [34] Deformation and Fracture Resistance of Steel with a Structure of a Natural Ferrite-Martensite Composite Under High-Speed Impact
    Pustovoit, V. N.
    Dolgachev, Yu. V.
    Inankov, I. V.
    METAL SCIENCE AND HEAT TREATMENT, 2024, 66 (1-2) : 1 - 4
  • [35] Formation of grain boundary ferrite in eutectoid and hypereutectoid pearlitic steels
    Miyamoto, Goro
    Karube, Yosuke
    Furuhara, Tadashi
    ACTA MATERIALIA, 2016, 103 : 370 - 381
  • [36] Kinetics of Ferrite Recrystallization and Austenite Formation During Intercritical Annealing of the Cold-Rolled Ferrite/Martensite Duplex Structures
    Mazaheri, Y.
    Kermanpur, A.
    Najafizadeh, A.
    Kalashami, A. Ghatei
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (03): : 1040 - 1051
  • [37] Evaluation of the Tensile Properties of Vanadium-Added Steels with Different Ferrite and Pearlite Hardness Ratios
    Kawamura, Minato
    Ogawa, Toshio
    Sun, Fei
    Adachi, Yoshitaka
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (13) : 6816 - 6824
  • [38] Predicting the effect of ultrafine ferrite on the deformation behavior of DP-steels
    Al-Abbasi, F. M.
    COMPUTATIONAL MATERIALS SCIENCE, 2016, 119 : 90 - 107
  • [39] On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels
    Calcagnotto, Marion
    Ponge, Dirk
    Raabe, Dierk
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (01): : 37 - 46
  • [40] Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels
    Ravi, Ashwath M.
    Kumar, Ankit
    Herbig, Michael
    Sietsma, Jilt
    Santofimia, Maria J.
    ACTA MATERIALIA, 2020, 188 : 424 - 434
12345