Flexural Strength of Satellite Teeth Cut by a Nonstandard Tool in a Planetary Gear

被引：0

作者：

Suntsov A.S. ^{[1
]}

Ovsyannikov A.V. ^{[2
]}

Vychuzhanina E.F. ^{[1
]}

机构：

[1] Kalashnikov Izhevsk State Technical University, Izhevsk

[2] Glazov Engineering and Economics Institute, Kalashnikov Izhevsk State Technical University, Glazov

来源：

Russian Engineering Research | 2021年 / 41卷 / 08期

关键词：

flexural strength; gear teeth; nonstandard gear-cutting tool; planetary gears; radii of curvature; transition curves;

D O I：

10.3103/S1068798X21080219

中图分类号：

学科分类号：

摘要：

Abstract: A method is proposed for determining the radius of curvature of transition curves in satellite-teeth profiles of planetary gears with internal engagement. The teeth are cut by a tool with a modified initial contour and are characterized by high flexural strength. The radii of curvature of tooth profiles cut by a standard tool and nonstandard (gear-shaping and rack) tools are compared. © 2021, Allerton Press, Inc.

引用

页码：683 / 686

页数：3

共 10 条

[1]

Kahraman A., Ligata H., Singh A., Influence of ring gear rim thickness on planetary gear set behavior, J. Mech. Des, 132, pp. 21-28, (2010)

[2]

Singh A., Epicyclic load sharing map—development and validation, Mech. Mach. Theory, 46, pp. 632-646, (2011)

[3]

Lin J., Parker G.R., Natural frequency veering in planetary gears, Mech. Struct. Mach., 29, 4, pp. 411-429, (2001)

[4]

Lin J., Parker G.R., Planetary gear parametric instability caused by mesh stiffness variation, J. Sound Vib, 249, pp. 38-48, (2002)

[5]

Plehanov F.I., Goldfarb V.I., Vychuzhanina E., Load distribution in meshing of planetary gearwheels and its influence on the technical and economic performance of the mechanism, Mech. Mach. Sci, 51, pp. 117-137, (2018)

[6]

Timofeev G.A., Samoilova M.V., Geometric and kinematic study of an integrated planetary-shaft mechanism, Vestn. Mosk. Gos. Tekh. Univ. Im. N.E. Baumana, Mashinostr., pp. 70-80, (2012)

[7]

Plekhanov F.I., Suntsov A.S., Ratov A.G., Byull. Izobret, (2017)

[8]

Plekhanov F.I., Gol'dfarb V.I., Geometry and strength index of internal gearing of planetary transmission wheels cut with a non standard tool, J. Mach. Manuf. Reliab, 48, pp. 379-384, (2019)

[9]

Ivanov A.S., Ermolaev M.M., Krikunov D.E., Design Versions of Cycloid Speed Reducers for High-Precision Servo Drives, Vestn. Mashinostr., pp. 9-11, (2013)

[10]

Plekhanov F.I., Geometry and strength indicator of internal gearing of K-H-V type planetary transmission gears with modified initial planetary gear circuit, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 3, pp. 3-7, (2014)

← 1 →