Study of the performance of polyurethane coatings derived from cottonseed oil polyol

被引：1
作者：
Prashant Narute
Aruna Palanisamy
机构：
[1] Laxminarayan Institute of Technology,Department of Surface Coating Technology
[2] CSIR-Indian Institute of Chemical Technology,Polymers and Functional Materials Division
来源：
Journal of Coatings Technology and Research | 2016年 / 13卷
关键词：
Cottonseed oil; Hydroxylation; Crosslink density; Mechanical properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Cottonseed oil (CSO) was converted into a polymerizable polyol by in-situ epoxidation and hydroxylation in the presence of water as nucleophile and sulfuric acid as catalyst. This hydroxylated CSO (HCSO) was polymerized with isophorone diisocyanate at different NCO-to-OH ratios to furnish polyurethane coatings of different composition. The mechanical properties of the resulting moisture-cured films were studied. The adhesion, abrasion resistance, impact strength, flexibility, water vapor permeability, and chemical and/or solvent and corrosion resistance of the coatings were investigated.
引用
收藏
页码：171 / 179
页数：8
相关论文
共 50 条
[31]   Rigid polyurethane foams from cottonseed oil using bio-based chain extenders: a renewable approach [J].
Manisha S. Pawar ;
Aparna S. Kadam ;
Pratiksha C. Singh ;
Vipul V. Kusumkar ;
Omprakash S. Yemul .
Iranian Polymer Journal, 2016, 25 :59-68
[32]   Effect of polyether/polyester polyol ratio on properties of waterborne two-component polyurethane coatings [J].
Li, Shiyu ;
Liu, Zhiyong ;
Hou, Lijie ;
Chen, Yang ;
Xu, Tonghui .
PROGRESS IN ORGANIC COATINGS, 2020, 141
[33]   High performance moisture cured poly(ether-urethane) amide coatings based on renewable resource (cottonseed oil) [J].
Meshram, Pawan D. ;
Puri, Ravindra G. ;
Patil, Amol L. ;
Gite, Vikas V. .
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2013, 10 (03) :331-338
[34]   Green polyurethane nanocomposites from soy polyol and bacterial cellulose [J].
Seydibeyoglu, M. Ozgur ;
Misra, Manjusri ;
Mohanty, Amar ;
Blaker, Jonny J. ;
Lee, Koon-Yang ;
Bismarck, Alexander ;
Kazemizadeh, Mohammad .
JOURNAL OF MATERIALS SCIENCE, 2013, 48 (05) :2167-2175
[35]   Incorporation of palm oil polyol in shape memory polyurethane: Implication for development of cardiovascular stent [J].
Zubir, Syazana Ahmad ;
Saad, Norshahli Mat ;
Harun, Farah Wahida ;
Ali, Ernie Suzana ;
Ahmad, Sahrim .
POLYMERS FOR ADVANCED TECHNOLOGIES, 2018, 29 (12) :2926-2935
[36]   Preparation and characterisation of rigid polyurethane foams using a rapeseed oil-based polyol [J].
Zieleniewska, Milena ;
Leszczynski, Michal K. ;
Kuranska, Maria ;
Prociak, Aleksander ;
Szczepkowski, Leonard ;
Krzyowska, Malgorzata ;
Ryszkowska, Joanna .
INDUSTRIAL CROPS AND PRODUCTS, 2015, 74 :887-897
[37]   The study of palm-oil-based bio-polyol on the morphological, acoustic and mechanical properties of flexible polyurethane foams [J].
Zhang, Dan ;
Chen, Shuming .
POLYMER INTERNATIONAL, 2020, 69 (03) :257-264
[38]   Adsorption of gossypol from cottonseed oil on oxides [J].
Kamga, R ;
Kayem, GJ ;
Rouxhet, PG .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2000, 232 (01) :198-206
[39]   Synthesis and Characterization of Vegetable oil based Polyurethane derived from Biobased isocyanate [J].
Sahoo, Swarnalata ;
Kalita, Hemjyoti ;
Mohanty, Smita ;
Nayak, S. K. .
JOURNAL OF POLYMER MATERIALS, 2017, 34 (03) :601-613
[40]   Evaluation of biodiesel obtained from cottonseed oil [J].
Rashid, Umer ;
Anwar, Farooq ;
Knothe, Gerhard .
FUEL PROCESSING TECHNOLOGY, 2009, 90 (09) :1157-1163
12345