Study of the performance of polyurethane coatings derived from cottonseed oil polyol

被引：1
作者：
Prashant Narute
Aruna Palanisamy
机构：
[1] Laxminarayan Institute of Technology,Department of Surface Coating Technology
[2] CSIR-Indian Institute of Chemical Technology,Polymers and Functional Materials Division
来源：
Journal of Coatings Technology and Research | 2016年 / 13卷
关键词：
Cottonseed oil; Hydroxylation; Crosslink density; Mechanical properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Cottonseed oil (CSO) was converted into a polymerizable polyol by in-situ epoxidation and hydroxylation in the presence of water as nucleophile and sulfuric acid as catalyst. This hydroxylated CSO (HCSO) was polymerized with isophorone diisocyanate at different NCO-to-OH ratios to furnish polyurethane coatings of different composition. The mechanical properties of the resulting moisture-cured films were studied. The adhesion, abrasion resistance, impact strength, flexibility, water vapor permeability, and chemical and/or solvent and corrosion resistance of the coatings were investigated.
引用
收藏
页码：171 / 179
页数：8
相关论文
共 50 条
[21]   Anionic waterborne polyurethane dispersions from maleated cotton seed oil polyol carrying ionisable groups [J].
Gaddam, Sashivinay Kumar ;
Palanisamy, Aruna .
COLLOID AND POLYMER SCIENCE, 2016, 294 (02) :347-355
[22]   Development of Flexible Polyurethane Nanostructured Biocomposite Foams Derived from Palm Olein-Based Polyol [J].
Adnan, Srihanum ;
Ismail, Tuan Noor Maznee Tuan ;
Noor, Norhayati Mohd ;
Din, Nik Siti Mariam Nek Mat ;
Hanzah, Nurul 'Ain ;
Kian, Yeong Shoot ;
Abu Hassan, Hazimah .
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2016, 2016
[23]   Bio-based flexible polyurethane foams derived from succinic polyol: Mechanical and acoustic performances [J].
Oliviero, Maria ;
Verdolotti, Letizia ;
Stanzione, Mariamelia ;
Lavorgna, Marino ;
Iannace, Salvatore ;
Tarello, Maurizio ;
Sorrentino, Andrea .
JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (45)
[24]   Synthesis and use of TMP ester biolubricant derived from cottonseed oil in SI engine [J].
Khan, Muhammad Bilal ;
Zahid, Rehan ;
Kazim, Ali Hussain ;
Javed, Khalid .
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2021, 73 (07) :1084-1090
[25]   High performance polyurethane nanocomposite films prepared from a masterbatch of graphene oxide in polyether polyol [J].
Pokharel, Pashupati ;
Lee, Dai Soo .
CHEMICAL ENGINEERING JOURNAL, 2014, 253 :356-365
[26]   An Experimental Study on the Exhaust Emissions of a Partially Loaded Compressed Ignition Engine Fueled with Biodiesel Derived from Cottonseed Oil [J].
Aydin, H. ;
Bayindir, H. .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2010, 32 (12) :1076-1085
[27]   High performance moisture cured poly(ether–urethane) amide coatings based on renewable resource (cottonseed oil) [J].
Pawan D. Meshram ;
Ravindra G. Puri ;
Amol L. Patil ;
Vikas V. Gite .
Journal of Coatings Technology and Research, 2013, 10 :331-338
[28]   Aluminum Powder Reinforced Polyurethane Foams Derived from Castor Oil [J].
Oliveira, Mylena L. ;
Orlando, Diego ;
Mulinari, Daniella R. .
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS, 2020, 30 (12) :5157-5167
[29]   Aluminum Powder Reinforced Polyurethane Foams Derived from Castor Oil [J].
Mylena L. Oliveira ;
Diego Orlando ;
Daniella R. Mulinari .
Journal of Inorganic and Organometallic Polymers and Materials, 2020, 30 :5157-5167
[30]   Keratin feathers as a filler for rigid polyurethane foams on the basis of soybean oil polyol [J].
Czlonka, Sylwia ;
Sienkiewicz, Natalia ;
Strakowska, Anna ;
Strzelec, Krzysztof .
POLYMER TESTING, 2018, 72 :32-45
12345