Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

被引：0
|
作者：
E. Zīle
D. Zeleniakiene
A. Aniskevich
机构：
[1] Institute for Mechanics of Materials,Department of Mechanical Engineering
[2] University of Latvia,undefined
[3] Kaunas University of Technology,undefined
来源：
Mechanics of Composite Materials | 2022年 / 58卷
关键词：
fused deposition modelling; laminate; voids; fiber;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.
引用
收藏
页码：169 / 180
页数：11
相关论文
共 50 条
  • [41] Failure investigation of fused deposition modelling parts fabricated at different raster angles under tensile and flexural loading
    Garg, Ashu
    Bhattacharya, Anirban
    Batish, Ajay
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (11) : 2031 - 2039
  • [42] Influence of Vapour Smoothing Process Parameters on Fused Deposition Modelling Parts Surface Roughness at Different Build Orientation
    Rajan, John A.
    Sugavaneswaran, M.
    Prashanthi, B.
    Deshmukh, Siddhant
    Jose, S.
    MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 2772 - 2778
  • [43] Electrically conductive nanocomposites for fused deposition modelling
    Dorigato, A.
    Moretti, V.
    Dul, S.
    Unterberger, S. H.
    Pegoretti, A.
    SYNTHETIC METALS, 2017, 226 : 7 - 14
  • [44] Fused deposition modelling for microwave circuits & antennas
    Cadman, Darren
    Zhang, Shiyu
    Vardaxoglou, Yiannis
    2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 2016, : 418 - 419
  • [45] A simple FBG pressure sensor fabricated using fused deposition modelling process
    Hong, Chengyu
    Yuan, Yu
    Yang, Yuyao
    Zhang, Yifan
    Abro, Zamir Ahmed
    SENSORS AND ACTUATORS A-PHYSICAL, 2019, 285 (269-274) : 269 - 274
  • [46] On the Mechanical Behaviour of Biosourced Cellular Polymer Manufactured Using Fused Deposition Modelling
    Guessasma, Sofiane
    Belhabib, Sofiane
    Bassir, David
    Nouri, Hedi
    Gomes, Samuel
    POLYMERS, 2020, 12 (11) : 1 - 15
  • [47] Part quality investigation in fused deposition modelling using machine learning classifiers
    Mihir S. Potnis
    Aayushi Singh
    Vijaykumar S. Jatti
    Mandar S. Sapre
    Shreyansh Pathak
    Shrey Joshi
    Ashwini V. Jatti
    International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 305 - 329
  • [48] Part quality investigation in fused deposition modelling using machine learning classifiers
    Potnis, Mihir S.
    Singh, Aayushi
    Jatti, Vijaykumar S.
    Sapre, Mandar S.
    Pathak, Shreyansh
    Joshi, Shrey
    Jatti, Ashwini V.
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (01): : 305 - 329
  • [49] Selection of optimal part orientation in fused deposition modelling using swarm intelligence
    Ghorpade, A.
    Karunakaran, K. P.
    Tiwari, M. K.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (07) : 1209 - 1220
  • [50] Fused deposition modelling of flexible kenaf fiber/thermoplastic polyurethane composites
    Hanim, Nuraina
    Syafiq, Mohamad Danial
    Hamid, Zuratul Ain Abdul
    Rusli, Arjulizan
    Abdullah, Muhammad Khalil
    Shuib, Raa Khimi
    PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 2022, 38 (04) : 328 - 342
12345