Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

被引：0
|
作者：
E. Zīle
D. Zeleniakiene
A. Aniskevich
机构：
[1] Institute for Mechanics of Materials,Department of Mechanical Engineering
[2] University of Latvia,undefined
[3] Kaunas University of Technology,undefined
来源：
Mechanics of Composite Materials | 2022年 / 58卷
关键词：
fused deposition modelling; laminate; voids; fiber;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.
引用
收藏
页码：169 / 180
页数：11
相关论文
共 50 条
  • [21] 3D Printed Parts with Honeycomb Internal Pattern by Fused Deposition Modelling; Experimental Characterization and Production Optimization
    Mahmoud Moradi
    Saleh Meiabadi
    Alexander Kaplan
    Metals and Materials International, 2019, 25 : 1312 - 1325
  • [22] Fused Deposition Modelling (FDM): New Standards for Mechanical Characterization
    Tosto, Claudio
    Saitta, Lorena
    Pergolizzi, Eugenio
    Patti, Antonella
    Celano, Giovanni
    Cicala, Gianluca
    MACROMOLECULAR SYMPOSIA, 2021, 395 (01)
  • [23] Plug Production for Thermoforming using Fused Deposition Modelling
    Eksi, Olcay
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2022, 25 (01): : 417 - 426
  • [24] Optimization of fused deposition modelling process parameters and the effect on residual stresses of built parts
    Nyiranzeyimana, Gaudence
    Mutua, James Mutuku
    Mbuya, Thomas Ochuku
    Mose, Bruno Robert
    MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 2914 - 2918
  • [25] Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
    Casavola, Caterina
    Cazzato, Alberto
    Moramarco, Vincenzo
    Pappalettere, Carmine
    MATERIALS & DESIGN, 2016, 90 : 453 - 458
  • [26] A review of the performance of polymer parts printed on fused deposition modelling under cyclic loading
    Zhang, Shaoguo
    Zhang, Yi
    Liu, Shoufa
    Zhang, Yafeng
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2025, 44 (3-4) : 164 - 177
  • [27] Acoustic Emission Analysis on Mode I Delamination Tests of Fused Deposition Modelling Parts
    Barile, C.
    Casavola, C.
    Cazzato, A.
    MECHANICS OF BIOLOGICAL SYSTEMS & MICRO-AND NANOMECHANICS, VOL 4, 2019, : 63 - 70
  • [28] Fused deposition modelling: a review
    Vyavahare, Swapnil
    Teraiya, Soham
    Panghal, Deepak
    Kumar, Shailendra
    RAPID PROTOTYPING JOURNAL, 2020, 26 (01) : 176 - 201
  • [29] Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder
    Wang, Cuicui
    Smith, Lee Miller
    Zhang, Wenfu
    Li, Mingpeng
    Wang, Ge
    Shi, Sheldon Q.
    Cheng, Haitao
    Zhang, Shuangbao
    POLYMERS, 2019, 11 (07)
  • [30] Laser polishing of thermoplastics fabricated using fused deposition modelling
    Chai, Yuan
    Li, Rachel W.
    Perriman, Diana M.
    Chen, Song
    Qin, Qing-Hua
    Smith, Paul N.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12): : 4295 - 4302
12345