Effect of Aging on Abrasive Wear of Deformable Aluminum Alloy AA6351

被引：0

作者：

C. Meriç

E. Atik

H. Kaçar

机构：

[1] Celal Bayar University,

来源：

Metal Science and Heat Treatment | 2004年 / 46卷

关键词：

Aluminum; Grain Size; Surface Roughness; Aluminum Alloy; Wear Resistance;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Special features of abrasive wear of deformable aluminum alloy AA6351 are studied as a function of aging conditions and modes of friction tests. After aging in different modes the specimens are tested for wear in a special installation by the method of “brad against disk” with the use of abrasives with different grain sizes. The effects of different speeds of sliding and loads on the wear resistance and surface roughness are studied.

引用

页码：110 / 114

页数：4

共 29 条

[1]

Meriç C.(2000)Physical and mechanical properties of cast under vacuum aluminum alloy 2024 containing lithium additions Mater. Res. Bull. 35 1479-1494

[2]

Meriç C.(2000)"An investigation on the elastic modulus and density of vacuum cast aluminum alloy 2024 containing lithium additions," J. Mater. Eng. Perform. 9 266-271

[3]

Unal A.(1994)Effect of aging temperature and time on fracture toughness of 6351 aluminum alloy Model. Measur. Control C 44 51-63

[4]

Kelesoglu E.(1991)DEEinfluss der Überhitzung auf die Festigkeitseigenschaften aushaertbarer Aluminum Knetlegierungen Metall. 45 139-142

[5]

Westhof J.(1987)Cyclic strain induced precipitation in a solution treated aluminum alloy Acta Metall. 35 2503-2510

[6]

Chandler H. D.(1995)The effect of thermal aging on the abrasive wear behavior of age-hardened 2014 Al_SiC and 6061 Al_SiC composites Wear 185 125-130

[7]

Bee J. V.(1998)Mechanical properties and wear strength in aluminum-alumina composites Mater. Struct. 31 418-422

[8]

Song W. Q.(1992)Effects of dislodgement and size of abrasive grains on abrasive wear Wear 155 297-307

[9]

Krauklis P.(1997)A comparison of the reciprocating and continuous two-body abrasive wear behavior of solution-treated and age hardened 2014 Al alloy Wear 208 25-35

[10]

Mouritz A. P.(1991)A simple approach to calculation of the sliding wear coefficient for medium carbon steels Wear 151 23-34

← 1 2 3 →