Investigation of the milling process based on a reduced dynamic model of cutting tool

被引：7

作者：

Voronov S.A. ^{[1
]}

Ivanov I.I. ^{[1
]}

Kiselev I.A. ^{[1
]}

机构：

[1] Bauman Moscow State Technical University, Vtoraya Baumanskaya ul. 5, Moscow

来源：

Journal of Machinery Manufacture and Reliability | 2015年 / 44卷 / 1期

关键词：

deformation of the cutting tool; dynamics of the milling; static condensation;

D O I：

10.3103/S1052618815010100

中图分类号：

学科分类号：

摘要：

A dynamic model of the milling process has been proposed that considers deformation of the cutting tool during machine operation. Methods intended for analysis, algorithms, and software have been developed using the finite element method and the static condensation method to reduce the model. The proposed algorithm enables one to take into consider the deformation of the milling cutter under the action of cutting forces, as well as the latter’s effect on the formation of the cut layer and the geometry of the resulting surface. © 2015, Allerton Press, Inc.

引用

页码：70 / 78

页数：8

共 16 条

[1]

Lee P., Altintas Y., Prediction of ball-end milling forces from orthogonal cutting data, Int. J. Mach. Tools Manuf, 36, 9, pp. 1059-1072, (1996)

[2]

Lee S.-K., Ko S.-L., Development of simulation system for machining process using enhanced Z map model, J. Mater. Processing Techn, 130-131, pp. 608-617, (2002)

[3]

Lazoglu I., Sculpture surface machining: a generalized model of ball-end milling force system, Int. J. Mach. Tools Manuf, 43, pp. 453-462, (2003)

[4]

Roth D., Ismail F., Bedi S., Mechanistic modeling of the milling process using an adaptive depth buffer, Comput. Aided Design, 35, pp. 1287-1303, (2003)

[5]

Fussell B.K., Jerard R.B., Hemmett J.G., Modeling of cutting geometry and forces for 5-axis sculptured surface machining, Comput.-Aided Design, 35, pp. 333-346, (2003)

[6]

Sridhar R., Hohn R.E., Long G.W., A general formulation of the milling process equation. Contribution to machine tool chatter research-5, ASME J. Eng. Industry, 90, pp. 317-324, (1968)

[7]

Opitz H., Bernardi F., Investigation and calculation of the chatter behavior of lathes and milling machines, Ann. CIRP, 18, pp. 335-343, (1970)

[8]

Altintas Y., Budak E., Analytical prediction of stability lobes in milling, Ann. CIRP, 44-1, pp. 357-362, (1995)

[9]

Ratchev S., Liu S., Huang W., Becker A.A., Milling error prediction and compensation in machining of low-rigidity parts, Int. J. Mach. Tools Manuf, 44, pp. 1629-1641, (2004)

[10]

Bravo U., Altuzarra O., Lopez de Lacalle L.N., Et al., Stability limits of milling considering the flexibility of the workpiece and the machine, Int. J. Mach. Tools Manuf, 45, pp. 1669-1680, (2005)

← 1 2 →