Effects of cryogenic cooling on the surface integrity in hard turning of AISI D6 steel

被引：0
作者：
Welber Vasconcelos Leadebal Jr
Anderson Clayton Alves de Melo
Adilson José de Oliveira
Nicolau Apoena Castro
机构：
[1] Federal University of Rio Grande do Norte,Department of Mechanical Engineering
[2] Federal University of Rio Grande do Norte,Department of Materials Engineering
来源：
Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2018年 / 40卷
关键词：
Cryogenic cooling; Hard turning; AISI D6 steel; Surface integrity; PCBN tools;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Methods able to enhance surface integrity of machined components have been one of the emerging areas in manufacturing engineering, and a technique that has been providing satisfying results in the last years is cryogenic machining. Besides promoting surface integrity improvement, it is considered an alternative to the use of conventional cutting fluids, which is in accordance with the latest global trends for sustainable means of production. In this sense, replacing grinding operation, which uses large volumes of conventional cutting fluids, by hard turning assisted by liquid nitrogen, for example, could be a good choice. The aim of this work was to investigate the effects of cryogenic cooling on the surface integrity of quenched and tempered AISI D6 tool steel after turning operation. Dry and cryogenic turning trials with polycrystalline cubic boron nitride tools were performed and the results of surface integrity (surface roughness and topography, microhardness and residual stresses, as well as the modified microstructure of the deformed layer) were analyzed for comparison. The results showed that cryogenic cooling played an important role in modifying the workpiece surface integrity, providing low values of surface roughness (similar to those obtained in grinding operations), as well as higher values of surface microhardness and compressive residual stresses as compared to the dry condition.
引用
收藏
相关论文
共 92 条
  • [11] Oliveira AJ(2011)Surface integrity in cryogenic machining of nickel based alloy—Inconel 718 J Mater Process Technol 211 773-783
  • [12] Diniz AE(2012)The effects of cryogenic cooling on surface integrity in hard machining: a comparison with dry machining CIRP Ann Manuf Technol 61 103-106
  • [13] Ursolino DJ(2014)Cryogenic machining-induced surface integrity: a review and comparison with dry, MQL, and flood-cooled machining Mach Sci Technol 18 149-198
  • [14] Singh RK(2003)The effect of machining on the surface properties of SiC/Al composites J Mater Process Technol 138 464-467
  • [15] Sharma AK(1984)Nondestructive testing for evaluating surface integrity Ann CIRP 33 489-509
  • [16] Dixit AR(2009)Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: a state-of-art research review and analysis Mach Sci Technol 13 437-470
  • [17] Tiwari AK(1999)Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steel J Mater Process Technol 96 225-233
  • [18] Pramanik A(2012)Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steel J Mater Process Technol 212 2609-2618
  • [19] Mandal A(2016)Effect of PCBN tool grade and cutting type on hard turning of high-chromium white cast iron Int J Adv Manuf Technol 82 797-807
  • [20] Singh RK(2005)The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC) Proc IMechE Part B J Eng Manuf 219 35-55
12345678910