Transfer of Abrasive Tool Material to the Surface of a Titanium Alloy at Different Stages of Grinding by a Wheel Made of Silicon Carbide

[1] Nosenko S.V.(2014)Influence of dressing of the wheel on the surface quality of titanium alloy in deep grinding Russ. Eng. Res. 34 632-636

[2] Nosenko V.A.(2018)The effect of grain size on the surface properties of titanium grade 2 after different treatments Surf. Coat. Technol. 335 13-24

[3] Kremenetskii L.L.(2017)Investigation of the effect of grinding parameters on surface quality in grinding of tc4 titanium alloy Procedia Mnauf. 11 2131-2138

[4] Garbacz H.(2019)Effect of grain wear on material removal behaviour during grinding of Ti-6Al-4V titanium alloy with single aggregated cNB grain Ceram. Int. 45 14842-604

[5] Wieciński P.(2018)Abrasive machining of advanced aerospace alloys and composites CIRP Ann. 64 581-690

[6] Kuczyńska D.(2005)The life cycle of a debris particle Tribol. Interface Eng. Ser. 48 681-368

[7] Kubacka D.(2005)A technical note on grit embedment following abrasive water-jet milling of a titanium alloy J. Mater. Process. Technol. 159 356-762

[8] Kurzydłowski K.J.(2020)Experimental investigations on depth of penetration and surface integrity in AZ91/Al Int. J. Adv. Manuf. Technol. 107 747-528

[9] Zhao T.(2016)O CIRP Ann. 65 523-undefined

[10] Yaoyao S.(undefined) nano-composites cut by abrasive water jet undefined undefined undefined-undefined

[1] Nosenko S.V.(2014)Influence of dressing of the wheel on the surface quality of titanium alloy in deep grinding Russ. Eng. Res. 34 632-636

[2] Nosenko V.A.(2018)The effect of grain size on the surface properties of titanium grade 2 after different treatments Surf. Coat. Technol. 335 13-24

[3] Kremenetskii L.L.(2017)Investigation of the effect of grinding parameters on surface quality in grinding of tc4 titanium alloy Procedia Mnauf. 11 2131-2138

[4] Garbacz H.(2019)Effect of grain wear on material removal behaviour during grinding of Ti-6Al-4V titanium alloy with single aggregated cNB grain Ceram. Int. 45 14842-604

[5] Wieciński P.(2018)Abrasive machining of advanced aerospace alloys and composites CIRP Ann. 64 581-690

[6] Kuczyńska D.(2005)The life cycle of a debris particle Tribol. Interface Eng. Ser. 48 681-368

[7] Kubacka D.(2005)A technical note on grit embedment following abrasive water-jet milling of a titanium alloy J. Mater. Process. Technol. 159 356-762

[8] Kurzydłowski K.J.(2020)Experimental investigations on depth of penetration and surface integrity in AZ91/Al Int. J. Adv. Manuf. Technol. 107 747-528

[9] Zhao T.(2016)O CIRP Ann. 65 523-undefined

[10] Yaoyao S.(undefined) nano-composites cut by abrasive water jet undefined undefined undefined-undefined