Acoustic emission used for detection of crack generation in propellers of turbine-pump units

被引:0
作者
V. Volkovas
J. Dulevicius
机构
[1] Kaunas University of Technology,Technological Systems Diagnostics Institute
[2] Kaunas University of Technology,undefined
来源
Russian Journal of Nondestructive Testing | 2006年 / 42卷
关键词
Acoustic Emission; Nondestructive Test; Rotor System; Acoustic Emission Signal; Lithium Niobate;
D O I
暂无
中图分类号
学科分类号
摘要
The problem of applying acoustic emission (AE) for detection of crack generation in heavily loaded elements of rotor systems, in particular, in propellers of turbine-pump units, in which breakdown of propellers during the operation is possible because of fatigue-crack generation, is studied. The data on AE signals radiated from some materials of the propellers exposed to monotonic and cyclic loading are presented, and the possibilities of emission and detection of AE signals with setups built in the rotor system construction are determined. Two developed setups are compared, one of which is characterized by high reliability, sufficient sensitivity to crack generation, and the absence of electronic amplifiers and power supply units. The design and results of the tests performed with this setup for AE-technique-based monitoring of the crack formation are presented.
引用
收藏
页码:248 / 254
页数:6
相关论文
共 50 条
  • [41] Noise isolation with phononic crystals to enhance fatigue crack growth detection using acoustic emission
    Kabir, Minoo
    Mostavi, Amir
    Ozevin, Didem
    JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING, 2018, 8 (03) : 529 - 542
  • [42] Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete Test method for classification of active cracks in concrete structures by acoustic emission
    Ohtsu, Masayasu
    Shiotani, Tomoki
    Shigeishi, M.
    Kamada, T.
    Yuyama, S.
    Watanabe, T.
    Suzuki, T.
    van Mier, J. G. M.
    Vogel, T.
    Grosse, C.
    Helmerich, R.
    Forde, M. C.
    Moczko, A.
    Breysse, D.
    Ivanovich, S. A.
    Sajna, A.
    Aggelis, D.
    Lacidogna, G.
    MATERIALS AND STRUCTURES, 2010, 43 (09) : 1187 - 1189
  • [45] Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete Test method for damage qualification of reinforced concrete beams by acoustic emission
    Ohtsu, Masayasu
    Shiotani, Tomoki
    Shigeishi, M.
    Kamada, T.
    Yuyama, S.
    Watanabe, T.
    Suzuki, T.
    van Mier, J. G. M.
    Vogel, T.
    Grosse, C.
    Helmerich, R.
    Forde, M. C.
    Moczko, A.
    Breysse, D.
    Ivanovich, S. A.
    Sajna, A.
    Aggelis, D.
    Lacidogna, G.
    MATERIALS AND STRUCTURES, 2010, 43 (09) : 1183 - 1186
  • [46] Rail crack detection using acoustic emission technique by joint optimization noise clustering and time window feature detection
    Zhang, Xin
    Wang, Kangwei
    Wang, Yan
    Shen, Yi
    Hu, Hengshan
    APPLIED ACOUSTICS, 2020, 160
  • [47] A parameter optimized variational mode decomposition method for rail crack detection based on acoustic emission technique
    Zhang, Xin
    Sun, Tiantian
    Wang, Yan
    Wang, Kangwei
    Shen, Yi
    NONDESTRUCTIVE TESTING AND EVALUATION, 2021, 36 (04) : 411 - 439
  • [48] Validation of Acoustic Emission (AE) Crack Detection in Aerospace Grade Steel Using Digital Image Correlation
    Pullin, R.
    Eaton, M. J.
    Hensman, J. J.
    Holford, K. M.
    Worden, K.
    Evans, S. L.
    ADVANCES IN EXPERIMENTAL MECHANICS VII, 2010, 24-25 : 221 - +
  • [49] An optical fiber F-P acoustic emission sensor system for the detection of steel crack initiation
    Tong, Xinglin
    Ji, Tao
    Wei, Wanting
    Wen, Changshan
    Zhu, Xiaolong
    Leng, Zhuoyan
    22ND INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS, PTS 1-3, 2012, 8421
  • [50] Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural network
    Okafor, A. Chukwujekwu
    Singh, Navdeep
    Singh, Navrag
    Oguejiofor, Benjamin N.
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2017, 30 (01) : 3 - 29