Effects of molecular structure on thermal, rheological and mechanical properties of drip irrigation PE tapes

被引:0
|
作者
Sina Haghparast
Gholamreza Pircheraghi
Saeed Houshmandmoayed
机构
[1] Sharif University of Technology,Polymeric Materials Research Group (PMRG), Department of Materials Science and Engineering
[2] JAM Petrochemical Company,Department of Research and Development
来源
Journal of Polymer Research | 2022年 / 29卷
关键词
Drip irrigation tape; Melt strength; Rheology; Long chain branch; Mechanical properties;
D O I
暂无
中图分类号
学科分类号
摘要
Considering the microstructure-processing-properties relationship, the attempt was made to distinguish the main structural features of drip irrigation tape grades. In this regards, two different commercial polyethylene grades using for irrigation tape application (DB and MD samples) with various microstructural features were fully characterized by means of thermal, rheological and mechanical measurements and microscopic observations. A set of DSC techniques revealed that DB sample has faster crystallization kinetic probably due to its high crystallizable segments in chains and broad molecular weight distribution. It was found, the type of co-monomer used in DB sample is 1-hexene and in MD sample is 1-butene, given the fact that the amount of co-monomer in DB sample is higher than MD. With special attention to various rheological and thermo-rheological methods, the presence of long branches in DB sample was confirmed, which led to melt strength enhancement and higher production rate. Plus, microscopic observations show that long chain branches cause the separation of amorphous and crystalline regions at the molecular scale in DB sample. This special morphology affects the long-term mechanical properties, so that more natural draw ratio and strain hardening modulus is observed in DB sample, which indicates more Environmental Stress Crack Resistance compared to MD sample.
引用
收藏
相关论文
共 50 条
  • [41] Influence of Stabilization Additive on Rheological, Thermal and Mechanical Properties of Recycled Polypropylene
    Mihelcic, Mohor
    Oseli, Alen
    Huskic, Miroslav
    Slemenik Perse, Lidija
    POLYMERS, 2022, 14 (24)
  • [42] Effect of rapeseed oil on the rheological, mechanical and thermal properties of plastic lubricants
    Lubomír Lapčík
    Martin Vašina
    Barbora Lapčíková
    Adam Bureček
    Lumír Hružík
    Mechanics of Time-Dependent Materials, 2022, 26 : 33 - 47
  • [43] Thermal, rheological, and mechanical properties of polylactide/poly(diethylene glycol adipate)
    Liang, Hongyu
    Hao, Yanping
    Liu, Sanrong
    Zhang, Huiliang
    Li, Yuesheng
    Dong, Lisong
    Zhang, Huixuan
    POLYMER BULLETIN, 2013, 70 (12) : 3487 - 3500
  • [44] Thermal, rheological, and mechanical properties of polylactide/poly(diethylene glycol adipate)
    Hongyu Liang
    Yanping Hao
    Sanrong Liu
    Huiliang Zhang
    Yuesheng Li
    Lisong Dong
    Huixuan Zhang
    Polymer Bulletin, 2013, 70 : 3487 - 3500
  • [45] Thermal, rheological, and mechanical properties of normal corn and potato starch blends
    Fonseca-Florido, Heidi A.
    Hernandez-Avilab, Juan
    Rodriguez-Hernandez, Adriana I.
    Castro-Rosas, Javier
    Acevedo-Sandoval, Otilio A.
    Chavarria-Hernandez, Norberto
    Gomez-Aldapa, Carlos A.
    INTERNATIONAL JOURNAL OF FOOD PROPERTIES, 2017, 20 (03) : 611 - 622
  • [46] Study of the Rheological, Thermal and Mechanical Properties of Polypropylene/Organoclay Composites and Fibres
    Marcincin, Anton
    Hricova, Marcela
    Marcincin, Konstantin
    Hoferikova, Alena
    FIBRES & TEXTILES IN EASTERN EUROPE, 2009, 17 (06) : 22 - 28
  • [47] Mechanical, Thermal, and Rheological Properties of Phlogopite-Incorporated Polycarbonate and Polystyrene
    Sang-Seok Yoon
    Sung-Hun Lee
    Gyu-Chul Hwang
    Min-Kyu Choi
    Beom-Goo Kang
    Hyungsu Kim
    Keon-Soo Jang
    Macromolecular Research, 2022, 30 : 365 - 374
  • [48] Mechanical, Thermal, and Rheological Properties of Phlogopite-Incorporated Polycarbonate and Polystyrene
    Yoon, Sang-Seok
    Lee, Sung-Hun
    Hwang, Gyu-Chul
    Choi, Min-Kyu
    Kang, Beom-Goo
    Kim, Hyungsu
    Jang, Keon-Soo
    MACROMOLECULAR RESEARCH, 2022, 30 (06) : 365 - 374
  • [49] Synthesis, mechanical and thermal rheological properties of new gellan gum derivatives
    Agnello, Stefano
    Gasperini, Luca
    Mano, Joao F.
    Pitarresi, Giovanna
    Palumbo, Fabio S.
    Reis, Rui L.
    Giammona, Gaetano
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2017, 98 : 646 - 653
  • [50] Rheological properties, structure and thermal behavior of liquid crystalline copolyester
    Levchenko, AA
    Abdullaev, KM
    Antipov, EM
    Kulichikhin, VG
    Stamm, M
    APPLIED MECHANICS AND ENGINEERING, VOL 4, SPECIAL ISSUE: "ICER '99", 1999: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ENGINEERING RHEOLOGY ICER '99, 1999, : 289 - 296