Boundary migration in a 3D deformed microstructure inside an opaque sample

被引:0
|
作者
Y. B. Zhang
J. D. Budai
J. Z. Tischler
W. Liu
R. Xu
E. R. Homer
A. Godfrey
D. Juul Jensen
机构
[1] Technical University of Denmark,Section for Materials Science and Advanced Characterization, Department of Wind Energy
[2] Risø Campus,Materials Science & Technology Division
[3] Oak Ridge National Laboratory,Advanced Photon Source
[4] Argonne National Laboratory,Department of Mechanical Engineering
[5] Brigham Young University,Key Laboratory of Advanced Materials (MOE), School of Materials Science and Engineering
[6] Tsinghua University,undefined
来源
Scientific Reports | / 7卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
How boundaries surrounding recrystallization grains migrate through the 3D network of dislocation boundaries in deformed crystalline materials is unknown and critical for the resulting recrystallized crystalline materials. Using X-ray Laue diffraction microscopy, we show for the first time the migration pattern of a typical recrystallization boundary through a well-characterized deformation matrix. The data provide a unique possibility to investigate effects of both boundary misorientation and plane normal on the migration, information which cannot be accessed with any other techniques. The results show that neither of these two parameters can explain the observed migration behavior. Instead we suggest that the subdivision of the deformed microstructure ahead of the boundary plays the dominant role. The present experimental observations challenge the assumptions of existing recrystallization theories, and set the stage for determination of mobilities of recrystallization boundaries.
引用
收藏
相关论文
共 50 条
  • [1] Boundary migration in a 3D deformed microstructure inside an opaque sample
    Zhang, Y. B.
    Budai, J. D.
    Tischler, J. Z.
    Liu, W.
    Xu, R.
    Homer, E. R.
    Godfrey, A.
    Jensen, D. Juul
    SCIENTIFIC REPORTS, 2017, 7
  • [2] Recrystallization boundary migration in the 3D heterogeneous microstructure near a hardness indent
    Hong, Chuanshi
    Zhang, Yubin
    Lindkvist, Adam
    Liu, Wenjun
    Tischler, Jon
    Xu, Ruqing
    Jensen, Dorte Juul
    SCRIPTA MATERIALIA, 2021, 205
  • [3] Guiding 3D cell migration in deformed synthetic hydrogel microstructures
    Dietrich, Miriam
    Le Roy, Hugo
    Brueckner, David B.
    Engelke, Hanna
    Zantl, Roman
    Raedler, Joachim O.
    Broedersz, Chase P.
    SOFT MATTER, 2018, 14 (15) : 2816 - 2826
  • [4] Quantification of local boundary migration in 2D/3D
    Zhang, Yubin
    40TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE: METAL MICROSTRUCTURES IN 2D, 3D AND 4D, 2019, 580
  • [5] Prediction of heat and mass transfer inside 3D frost microstructure
    Mao, Ning
    Nishimura, Katsuhiko
    Gong, Jiaming
    Takayashiki, Masahiro
    Sciazko, Anna
    Komatsu, Yosuke
    Tang, Jinchen
    Shikazono, Naoki
    APPLIED THERMAL ENGINEERING, 2024, 247
  • [6] Migration and 3D Traction Force Measurements inside Compliant Microchannels
    Afthinos, Alexandros
    Bera, Kaustav
    Chen, Junjie
    Ozcelikkale, Altug
    Amitrano, Alice
    Choudhury, Mohammad Ikbal
    Huang, Randy
    Pachidis, Pavlos
    Mistriotis, Panagiotis
    Chen, Yun
    Konstantopoulos, Konstantinos
    NANO LETTERS, 2022, : 7318 - 7327
  • [7] D3AdvM: A direct 3D adversarial sample attack inside mesh data
    Xu, Huangxinxin
    He, Fazhi
    Fan, Linkun
    Bai, Junwei
    COMPUTER AIDED GEOMETRIC DESIGN, 2022, 97
  • [8] RECONSTRUCTION OF 3D MICROSTRUCTURE OF THE ROCK SAMPLE BASING ON THE CT IMAGES
    He, Xiang
    PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON WAVELET ANALYSIS AND PATTERN RECOGNITION, 2009, : 74 - 78
  • [9] Gathering of Opaque Robots in 3D Space
    Bhagat, Subhash
    Chaudhuri, Sruti Gan
    Mukhopadyaya, Krishnendu
    ICDCN'18: PROCEEDINGS OF THE 19TH INTERNATIONAL CONFERENCE ON DISTRIBUTED COMPUTING AND NETWORKING, 2018,
  • [10] Calculation of grain boundary normals directly from 3D microstructure images
    Lieberman, E. J.
    Rollett, A. D.
    Lebensohn, R. A.
    Kober, E. M.
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2015, 23 (03)