Sensitive and flexible humidity sensor based on sodium hyaluronate/MWCNTs composite film

被引：0
作者：
Chengcheng Cai
Weiqiang Zhao
Jing Yang
Lei Zhang
机构：
[1] Tianjin University,Department of Biochemical Engineering, School of Chemical Engineering and Technology, Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Collaborative Innovation Center of
[2] Tianjin University,Frontier Technology Research Institute
来源：
Cellulose | 2021年 / 28卷
关键词：
Humidity sensor; Sodium hyaluronate; Multi-walled carbon nanotubes; Ultrafast response; Breath monitoring;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A sensitive humidity responsive sensor based on sodium hyaluronate (SH)/multi-walled carbon nanotubes (MWCNTs) composite film is reported. The sensor is fabricated on a flexible interdigital electrode of a polyethylene terephthalate substrate by a drop coating method. The humidity sensing properties, including repeatability, hysteresis, stability, response-recovery characteristics are investigated, and the film containing 50 wt% MWCNTs exhibits the best performance. Compared with most previous work, this resultant sensor presents a broader detection range for relative humidity (11–98% RH) and faster response/recovery performance (0.32 s/0.27 s). Moreover, the sensor possesses excellent stability after the humidity changes repeatedly, long-term operation, temperature changes and cyclic mechanical bending. The outstanding performance is probably attributable to the synergistic effect of SH and MWCNTs. This sensor developed in this work possesses the potential to be applied in breath monitoring, respiration pattern identification, and touchiness switch by sensing skin sweat evaporation in a non-contact way.
引用
收藏
页码：6361 / 6371
页数：10
相关论文
共 178 条
[21]  
Chen C(2015) for flexible humidity sensor with high selectivity Adv Mater 5 36-154
[22]  
Wang X(2019)Excellent humidity sensor based on LiCl loaded hierarchically porous polymeric microspheres Microsyst Nanoeng 87 80-261
[23]  
Li M(2013)Highly sensitive and multimodal all-carbon skin sensors capable of simultaneously detecting tactile and biological stimuli Solid-State Electron 9 1714-20
[24]  
Fan Y(2020)Surface acoustic wave humidity sensors based on uniform and thickness controllable graphene oxide thin films formed by surface tension Opt Commun 10 34683-7638
[25]  
Sun R(2017)A resistive-type sensor based on flexible multi-walled carbon nanotubes and polyacrylic acid composite films Adv Sci 257 800-260
[26]  
Chen W-P(2009)An optical fiber sensor based on carboxymethyl cellulose/carbon nanotubes composite film for simultaneous measurement of relative humidity and temperature Sensors 6 5016-390
[27]  
Zhao Z-G(2019)Porous ionic membrane based flexible humidity sensor and its multifunctional applications Opt Lett. 387 149-4251
[28]  
Liu X-W(2018)Humidity sensitivity of multi-walled carbon nanotube networks deposited by dielectrophoresis ACS Appl Mater Interfaces 14 e1800524-603
[29]  
Zhang Z-X(2019)Spider silk-based humidity sensor Adv Funct Mater 135 255-1152
[30]  
Suo C-G(2018)A handwriting method for low-cost gas sensors Sens Actuators, B. 6 eaaw1838-82
12345678910