Design of a maximum power point tracking-based PID controller for DC converter of stand-alone PV system

被引:3
作者
Fatema A. Mohammed
Mohiy E. Bahgat
Saied S. Elmasry
Soliman M. Sharaf
机构
[1] University of Helwan,Electrical Power and Machines Department, Faculty of Engineering – Helwan
关键词
PV system; Stand-alone PV systems; DC–DC converter; Boost converters; MPPT algorithms; IC algorithm; PID optimization;
D O I
10.1186/s43067-022-00050-5
中图分类号
学科分类号
摘要
Stand-alone photovoltaic system (PV) produces a variance in the output voltage under variable irradiation and temperature, and variable load conditions, resulting in control challenges. The research scope is to maintain a constant output load voltage despite variations in input voltage or load. The use of a DC converter ensures that the output voltage of such systems remains constant regardless of changes in the production voltage and load. The control on a DC boost converter is employed to solve this problem. This paper presents the design of a maximum power point tracking-based (MPPT) DC converter controller for such a system. The MPPT-based PID has been proposed as a control approach and implemented to the system DC converter. Incremental Conductance (IC) algorithm has been employed as an MPPT in association with an optimized PID. The Particle Swarm optimization technique (PSO) has been used to optimize the proposed PID through selected cost function. The PV system with the loaded converter is modeled and simulated using the MATLAB/Simulink environment. The system performance is displayed using a family of curves under different operating conditions and disturbances.
引用
收藏
相关论文
共 57 条
[1]  
Ansari MM(2020)Considering the uncertainty of hydrothermal wind and solar-based DG Alex Eng J 59 4211-4236
[2]  
Guo C(2020)Chattering free adaptive sliding mode controller for photovoltaic panels with maximum power point tracking Energies 13 5678-2277
[3]  
Shaikh M(2017)Design and simulation of a DC–DC boost converter with PID controller for enhanced performance Int J Eng Res Technol (IJERT) 4 2273-247
[4]  
Chopra N(2017)Improve efficiency of Photovoltaic (PV) system based by PID controller Int Res J Eng Technol (IRJET) 7 240-82
[5]  
Yang B(2015)Control of a Photovoltaic system operating at maximum power point and constant output voltage under different atmospheric conditions Int J Comput Electr Eng 30 e12398-620
[6]  
Pan J(2020)FPGA-based active disturbance rejection control and maximum power point tracking for a Photovoltaic system Int Trans Electr Energ Syst 10 77-1417
[7]  
Zhu Y(2018)Effects of adaption gain in direct model reference adaptive control for a single conical tank system Int J Digit Signal Process 3 615-320
[8]  
Huang X(2017)Modeling and analysis of different tuning methodologies of PID controller for a linearly parameterized non-linear system IJSART 102 1403-236
[9]  
Ali HG(2021)Design of state feedback LQR based dual mode fractional-order PID controller using inertia weighted PSO algorithm: for control of an under actuated system J Inst Eng India Ser C 32 310-261
[10]  
Arbos RV(2020)Design of direct MRAC augmented with 2 DoF PIDD controller: An application to speed control of a servo plant J King Saud Univ Eng Sci 5 229-315