Quantitative Fractographic Analysis of Variability in the Tensile Ductility of a High Strength Dual-Phase Steel

被引：7
|
作者：
Jamwal R.S. [1 ,3 ]
Gokhale A.M. [1 ]
Bhat S.P. [2 ]
机构：
[1] School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA
[2] ArcelorMittal Global RandD, East Chicago, IN
[3] ThyssenKrupp Steel USA, LLC, Calvert, AL
来源：
Metallography, Microstructure, and Analysis | 2013年 / 2卷 / 1期
关键词：
Dual-phase steels; Fractography; Scanning electron microscopy; Stereology;
D O I：
10.1007/s13632-012-0051-7
中图分类号：
学科分类号：
摘要：
Variability in tensile ductility of a dual-phase steel is investigated using quantitative microscopy and fractography. Variability in the ductility does not correlate with the global properties such as phase volume fractions. Quantitative fractography reveals an inverse quantitative correlation between number density of the pullouts of ferrite-martensite colonies in the fracture surfaces and the ductility of corresponding tensile test specimens. Therefore, local variations in the attributes of interfaces, rather than global microstructural properties, account for a significant part of variability in ductility. © 2012 Springer Science+Business Media New York and ASM International.
引用
收藏
页码：30 / 34
页数：4
相关论文
共 50 条
  • [1] High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing
    H. S. Arora
    A. Ayyagari
    J. Saini
    K. Selvam
    S. Riyadh
    M. Pole
    H. S. Grewal
    S. Mukherjee
    Scientific Reports, 9
  • [2] High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing
    Arora, H. S.
    Ayyagari, A.
    Saini, J.
    Selvam, K.
    Riyadh, S.
    Pole, M.
    Grewal, H. S.
    Mukherjee, S.
    SCIENTIFIC REPORTS, 2019, 9 (1)
  • [3] Achieving high strength and high ductility of dual-phase steel via alternating lamellar microstructure
    Niu, Gang
    Ding, Chao
    Liu, Zhiying
    Jia, Xiaohang
    Chen, Haoxiu
    Gong, Na
    Wang, Yong
    Cheh, Dennis TAN. Cheng
    Misra, R. D. K.
    Wu, Huibin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 892
  • [4] TENSILE FRACTURE OF A DUAL-PHASE STEEL
    RAY, RK
    SCRIPTA METALLURGICA, 1984, 18 (11): : 1205 - 1209
  • [5] High strength-ductility combination by quenching and partitioning of a low carbon microalloyed dual-phase steel
    Singh, Alok Kumar
    Chouhan, Devesh Kumar
    Bhattacharya, Basudev
    Biswas, Somjeet
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 870
  • [6] High strength, ductility and sheet formability by normalizing and quenching of low carbon microalloyed dual-phase steel
    Singh, Alok Kumar
    Bhattacharya, Basudev
    Biswas, Somjeet
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 890
  • [7] ON THE EFFECT OF THE VOLUME FRACTION OF MARTENSITE ON THE TENSILE-STRENGTH OF DUAL-PHASE STEEL
    JENA, AK
    CHATURVEDI, MC
    MATERIALS SCIENCE AND ENGINEERING, 1988, 100 : 1 - 6
  • [8] MODELING TENSILE DEFORMATION OF DUAL-PHASE STEEL
    KIM, CM
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (05): : 1263 - 1268
  • [9] THE TENSILE DEFORMATION OF A MARTENSITIC DUAL-PHASE STEEL
    REUBEN, RL
    BAKER, TN
    MATERIALS SCIENCE AND ENGINEERING, 1984, 63 (02): : 229 - 238
  • [10] Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading
    Qin, Jingui
    Chen, Rong
    Wen, Xuejun
    Lin, Yuliang
    Liang, Minzu
    Lu, Fangyun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 586 : 62 - 70
12345