Natural frequency veering and mode localization caused by straight through–cracks in rectangular plates with elastic boundary conditions

被引:0
作者
Tianming Huang
Huancai Lu
D. Michael McFarland
Wen L. Li
Chin An Tan
Lawrence A. Bergman
Jian Gong
机构
[1] Zhejiang University of Technology,Sound and Vibration Laboratory, College of Mechanical Engineering
[2] University of Illinois at Urbana-Champaign,Department of Aerospace Engineering
[3] Advanced Information Services,Department of Mechanical Engineering
[4] Wayne State University,undefined
来源
Acta Mechanica | 2018年 / 229卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
A solution method is presented for vibration analysis of through-cracked rectangular plates. A domain decomposition technique is employed in combination with a set of admissible functions which were previously proposed for triangular and rectangular plates with elastic boundary conditions. The continuity conditions at interconnecting boundaries of the subdomains are enforced by translational and rotational springs with zero or infinite stiffness. The Rayleigh–Ritz method is employed to determine the generalized coordinates and the corresponding modal frequencies and shapes. This special set of admissible functions allows all the involved integrals to be calculated analytically in closed form. Numerical examples are presented for plates with various crack configurations and boundary conditions. The current results are compared with those available in the literature to verify their convergence and correctness. The main advantage of the proposed method lies in its applicability to various combinations of boundary conditions and crack configurations. This method is then employed to determine the modal characteristics of simply supported square plates by focusing on the effects of various crack parameters on frequency veering, mode splitting, and mode localization. Finally, experiments are reported for three rectangular plates with different cracks for validation.
引用
收藏
页码:4017 / 4031
页数:14
相关论文
共 86 条
  • [1] Lynn PP(1967)Free vibration of thin rectangular plates having narrow cracks with simply supported edges Mech. Dev. 4 911-928
  • [2] Kumbasar N(1972)Vibration and stability of cracked rectangular plates Int. J. Solids Struct. 8 69-91
  • [3] Stahl B(1980)Vibration of cracked rectangular plates Bull. JSME 23 732-740
  • [4] Keer LM(1981)Vibration and bending of a cracked plate Rozprawy Inzynierskie 29 295-310
  • [5] Hirano Y(1983)Bending vibration of a simply supported rectangular plate with a crack parallel to one edge Eng. Fract. Mech. 18 1111-1118
  • [6] Okazaki K(1985)Bending vibration of a rectangular plate with arbitrarily located rectilinear crack Eng. Fract. Mech. 22 687-695
  • [7] Aggarwala BD(2000)Introduction of modified comparison functions for vibration analysis of a rectangular cracked plate J. Sound Vib. 236 245-258
  • [8] Ariel PD(1992)The flexural vibration of rectangular plate systems approached by using artificial springs in the Rayleigh–Ritz method J. Sound Vib. 159 39-55
  • [9] Solecki R(1994)A solution method for analysis of cracked plates under vibration Eng. Fract. Mech. 48 393-404
  • [10] Solecki R(2009)Vibration analysis of rectangular plates with side cracks via the Ritz method J. Sound Vib. 323 974-988