Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup

被引：0
|
作者：
Kyoung-soo Lee
W. Kim
Jeong-geun Lee
Chi-yong Park
Jun-seok Yang
Tae-ryong Kim
Jai-hak Park
机构：
[1] Korea Electric Power Research Institute,Nuclear Power Generation Laboratory
[2] Chungbuk University,Safety Engineering Department
来源：
Journal of Mechanical Science and Technology | 2009年 / 23卷
关键词：
Block removal and splitting layer method (BRSL); Dissimilar metal weld (DMW); Finite element analysis (FEA); Hole drilling method (HDM); Weld residual stress (WRS);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Finite element (FE) analysis and experiment for weld residual stress (WRS) in the pressurizer safety nozzle mockup is described in various processes and results. Foremost of which is the dissimilar simulation metal welding (DMW) between carbon steel and austenitic stainless steel. Thermal and structural analyses were compared with actual residual stress, and actual measurements of. Magnitude and distribution of WRS in the nozzle mockup were assessed. Two measurement methods were used: hole-drilling method (HDM) with strain gauge for residual stress on the surface of the mockup, and block removal and splitting layer (BRSL) method for through-thickness. FE analysis and measurement data showed good agreement. In conclusion, the characteristics of weld residual stress of DMW could be well understood and the simplified FE analysis was verified as acceptable for estimating WRS.
引用
收藏
页码：2948 / 2955
页数：7
相关论文
共 50 条
  • [41] A study on welding residual stress analysis of a small bore nozzle with dissimilar metal welds
    Kim, Jong Sung
    Seo, Joong Hyun
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 90-91 : 69 - 76
  • [42] Sensitivity Analysis of Finite Element Parameters for Estimating Residual Stress of J-Groove Weld in RPV CRDM Penetration Nozzle
    Bae, Hong Yeol
    Kim, Ju Hee
    Kim, Yun Jae
    Oh, Chang Young
    Kim, Ji Soo
    Lee, Sung Ho
    Lee, Kyoung Soo
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2012, 36 (10) : 1115 - 1130
  • [43] EXPERIMENTAL STUDY OF THE WELD RESIDUAL STRESS IN MANUALLY AND MECHANICALLY FABRICATED DISSIMILAR METAL WELD
    Duan, Xinjian
    Glover, Andrew
    Sun, Dongmei
    Paddea, Sanjooram
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6B, 2019,
  • [44] Welding overlay analysis of dissimilar metal weld cracking of feedwater nozzle
    Tsai, Y. L.
    Wang, Li. H.
    Fan, T. W.
    Ranganath, Sam
    Wang, C. K.
    Chou, C. P.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2010, 87 (01) : 26 - 32
  • [45] IMPORTANT RESIDUAL STRESS FEATURES IN REACTOR NOZZLE DISSIMILAR METAL WELDS
    Zhang, Jinmiao
    Song, Shaopin
    Dong, Pingsha
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 663 - 671
  • [46] THE IMPACT OF AXI-SYMMETRIC BOUNDARY CONDITIONS ON PREDICTED RESIDUAL STRESS AND SHRINKAGE IN A PWR NOZZLE DISSIMILAR METAL WELD
    Bendeich, Philip J.
    Muransky, Ondrej
    Hamelin, Cory J.
    Smith, Mike C.
    Edwards, Lyndon
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 6, PTS A AND B, 2012, : 1139 - 1145
  • [47] Residual stress measurement of Al/steel dissimilar friction stir weld
    Ogawa, Daisuke
    Kakiuchi, Toshifunni
    Hashiba, Keigo
    Uematsu, Yoshihiko
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (08) : 685 - 694
  • [48] Effects of Similar Metal Weld on Residual Stress in Dissimilar Metal Weld According to Safe End Length
    Song, Tae-Kwang
    Chun, Yun-Bae
    Oh, Chang-Young
    Bae, Hong-Yeol
    Kim, Yun-Jae
    Lee, Sang-Hoon
    Lee, Kyoung-Soo
    Park, Chi-Yong
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2009, 33 (07) : 664 - 672
  • [49] Residual stress numerical simulation of two dissimilar metal weld junctions
    Gilles, Philippe
    Nouet, Ludovic
    Devaux, Josette
    Duranton, Pascal
    RESIDUAL STRESS AND ITS EFFECTS ON FATIGUE AND FRACTURE, 2006, : 3 - +
  • [50] RESIDUAL STRESS STUDY IN DISSIMILAR METAL WELDS OF A PWR PRESSURIZER SURGE NOZZLE: VALIDATION OF DEVELOPED FAST ANALYSIS METHOD AND EXAMINATION OF SAFE-END LENGTH EFFECT
    Maekawa, Akira
    Kawahara, Atsushi
    Serizawa, Hisashi
    Murakawa, Hidekazu
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION, 2014,
12345