Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup

被引：0
|
作者：
Kyoung-soo Lee
W. Kim
Jeong-geun Lee
Chi-yong Park
Jun-seok Yang
Tae-ryong Kim
Jai-hak Park
机构：
[1] Korea Electric Power Research Institute,Nuclear Power Generation Laboratory
[2] Chungbuk University,Safety Engineering Department
来源：
Journal of Mechanical Science and Technology | 2009年 / 23卷
关键词：
Block removal and splitting layer method (BRSL); Dissimilar metal weld (DMW); Finite element analysis (FEA); Hole drilling method (HDM); Weld residual stress (WRS);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Finite element (FE) analysis and experiment for weld residual stress (WRS) in the pressurizer safety nozzle mockup is described in various processes and results. Foremost of which is the dissimilar simulation metal welding (DMW) between carbon steel and austenitic stainless steel. Thermal and structural analyses were compared with actual residual stress, and actual measurements of. Magnitude and distribution of WRS in the nozzle mockup were assessed. Two measurement methods were used: hole-drilling method (HDM) with strain gauge for residual stress on the surface of the mockup, and block removal and splitting layer (BRSL) method for through-thickness. FE analysis and measurement data showed good agreement. In conclusion, the characteristics of weld residual stress of DMW could be well understood and the simplified FE analysis was verified as acceptable for estimating WRS.
引用
收藏
页码：2948 / 2955
页数：7
相关论文
共 50 条
  • [31] Studies of residual stress measurement and analysis techniques for a PWR dissimilar weld joint
    Ogawa, Naoki
    Muroya, Itaru
    Iwamoto, Youichi
    Ohta, Takahiro
    Ochi, Mayumi
    Hojo, Kiminobu
    Ogawa, Kazuo
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 90-91 : 84 - 90
  • [32] Biaxial Residual Stress Mapping for a Dissimilar Metal Welded Nozzle
    Hill, Michael R.
    Olson, Mitchell D.
    DeWald, Adrian T.
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (01):
  • [33] Biaxial Residual Stress Mapping for a Dissimilar Metal Welded Nozzle
    Hill, Michael R.
    Olson, Mitchell D.
    DeWald, Adrian T.
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2014, VOL 6B, 2014,
  • [34] Residual stress analysis of an Overlay weld and a repair weld on the dissimilar Butt weld
    Kim, Kang Soo
    Lee, Ho Jin
    Lee, Bong Sang
    Jung, In Chul
    Park, Kwang Soo
    NUCLEAR ENGINEERING AND DESIGN, 2009, 239 (12) : 2771 - 2777
  • [35] Biaxial Residual Stress Mapping in a PWR Dissimilar Metal Weld
    Hill, Michael R.
    Olson, Mitchell D.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION, 2014,
  • [36] Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets
    Huang, Li
    Moraes, J. F. C.
    Sediako, Dimitry G.
    Jordon, J. B.
    Guo, Haiding
    Su, Xuming
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (02):
  • [37] MEASUREMENT OF RESIDUAL STRESS IN REACTOR NOZZLE MOCK-UPS CONTAINING DISSIMILAR METAL WELDS
    DeWald, Adrian T.
    Hill, Michael R.
    Benson, Michael L.
    Rudland, David L.
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2014, VOL 6B, 2014,
  • [38] EFFECTIVENESS OF EXCAVATE AND WELD REPAIR ON A LARGE DIAMETER PIPING DISSIMILAR METAL WELD BY FINITE ELEMENT ANALYSIS
    Ku, Francis H.
    Riccardella, Pete C.
    Alleshwaram, Aparna
    Willis, Eric
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 6, PTS A AND B, 2012, : 1237 - 1244
  • [39] Fatigue life of a dissimilar welded joint considering the weld residual stress: Experimental and finite element simulation
    Zhang, Weiya
    Jiang, Wenchun
    Zhao, Xu
    Tu, Shan-Tuang
    INTERNATIONAL JOURNAL OF FATIGUE, 2018, 109 : 182 - 190
  • [40] Investigation and analysis of weld induced residual stresses in two dissimilar pipes by finite element modeling
    Kavoshgharan Mechanic of Mersade Gharb Company, Azad University of Bonab, Bonab, Iran
    不详
    不详
    J. Appl. Sci., 2008, 6 (1014-1020):
12345