Influence of cup-center-edge angle on micro-motion at the interface between the cup and host bone in cementless total hip arthroplasty: three-dimensional finite element analysis

被引：7

作者：

Kaku N. ^{[1
]}

Tabata T. ^{[1
]}

Tsumura H. ^{[1
]}

机构：

[1] Department of Orthopaedic Surgery, Faculty of Medicine, Oita University, 1-1 Idaigaoka Hazamacho, Yufu City, 879-5593, Oita

来源：

European Journal of Orthopaedic Surgery & Traumatology | 2015年 / 25卷 / 8期

关键词：

Bone graft; Cementless; Cup-center-edge angle; Dysplasia; Finite element model; Micro-motion;

D O I：

10.1007/s00590-015-1697-z

中图分类号：

学科分类号：

摘要：

We verified the index cup position required for bulk bone grafting instead of morcellized grafting immediately after cementless total hip arthroplasty. Three-dimensional finite element analysis was used to evaluate changes in the volume of the slippage of the cup–host bone interface as micro-motion of the cup at the acetabular bone defect site depending on the cup-center-edge (CE) angle. The conditions of bulk bone grafts were similar to those of cortical bone. Slippage increased with decreasing cup-CE angle. A bulk bone graft tightly fixed to the host bone prevented considerably larger slippage between the cup and host bone. A smaller cup-CE angle increased the impact of the bulk bone graft on slippage. When the cup-CE angle was 0° or −10°, the criterion for slippage in favorable initial fixation in all conditions was <40 μm. Even if transplanted bulk bone is used, unless good fixation is obtained between the host bone, and the cup and bone graft, it is impossible to obtain reliable fixation of the cup with a cup-CE angle <−10° and slippage exceeding 40 μm. Bulk bone grafting tightly fixed to the host bone improves initial the cup–host bone fixation, especially when the cup-CE angle is small, such as <−10°. In clinical practice, negative factors are implicated in the initial fixation of various cups, and sufficient fixation between the host bone and cup or bulk bone graft using a screw is effective when the cup-CE angle is extremely small. © 2015, Springer-Verlag France.

引用

页码：1271 / 1277

页数：6

共 30 条

[11]

Engh C.A., O'Connor D., Jasty M., McGovern T.F., Bobyn J.D., Harris W.H., Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses, Clin Orthop Relat Res, 285, pp. 13-29, (1992)

[12]

Jasty M., Bragdon C., Burke D., O'Connor D., Lowenstein J., Harris W.H., In vivo skeletal responses to porous-surfaced implants subjected to small induced motions, J Bone Joint Surg Am, 79, 5, pp. 707-714, (1997)

[13]

Kelley S.S., High hip center in revision arthroplasty, J Arthroplasty, 9, pp. 503-510, (1994)

[14]

Schutzer S.F., Harris W.H., High placement of porous-coated acetabular components in complex total hip arthroplasty, J Arthroplasty, 9, 4, pp. 359-367, (1994)

[15]

Hendricks K.J., Harris W.H., High placement of noncemented acetabular components in revision total hip arthroplasty. A concise follow-up, at a minimum of fifteen years, of a previous report, J Bone Joint Surg, 88, 10, pp. 2231-2236, (2006)

[16]

Hintermann B., Morscher E., Total hip replacement with solid autologous femoral head graft for hip dysplasia, Arch Orthop Trauma Surg, 114, 3, pp. 137-144, (1995)

[17]

Dorr L.D., Wan Z., Cohen J., Hemispheric titanium porous coated acetabular component without screw fixation, Clin Orthop Relat Res, 351, pp. 158-168, (1998)

[18]

Inoue S., Horii M., Suehara H., Ueshima K., Shiga T., Fujioka M., Takahashi K., Asano T., Kim W.C., Nakagawa M., Minimum 10-year radiographic follow-up of a cementless acetabular component for primary total hip arthroplasty with a bulk autograft, J Orthop Sci, 8, 5, pp. 664-668, (2003)

[19]

Kim M., Kadowaki T., High long-term survival of bulk femoral head autograft for acetabular reconstruction in cementless THA for developmental hip dysplasia, Clin Orthop Relat Res, 468, 6, pp. 1611-1620, (2010)

[20]

Takao M., Nakamura N., Ohzono K., Sakai T., Nishii T., Sugano N., The results of a press-fit-only technique for acetabular fixation in hip dysplasia, J Arthroplasty, 26, 4, pp. 562-568, (2011)

← 1 2 3 →