Study of void closure in hot radial forging process using 3D nonlinear finite element analysis

被引：0
作者：
J. Chen
K. Chandrashekhara
C. Mahimkar
S. N. Lekakh
V. L. Richards
机构：
[1] Missouri University of Science and Technology,Department of Mechanical and Aerospace Engineering
[2] Missouri University of Science and Technology,Department of Materials Science and Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2012年 / 62卷
关键词：
Void closure; Hot radial forging; Nonlinear model; Finite element analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Hot radial forging is used to reduce porosity and increase strength for large-diameter billets. The goal of this research is to study void closure behavior in the hot radial forging process. A nonlinear coupled finite element model is developed to investigate the deformation mechanism of internal void defects during the hot radial forging process. The model is formulated in a three-dimensional frame and a viscoplastic material model has been used to describe the material behavior subjected to large deformation and high temperature. A global–local technique is employed to obtain accurate solutions around the void region. The effects of void location, mandrel, die shape, and the reduction of the tube thickness on the final void reduction are systematically investigated. The predicted reductions for central longitudinal voids in hot upsetting and hot rolling processes are in good agreement with experimental findings. The simulation results provide a valuable procedure for the design of porosity reduction during the hot radial forging process.
引用
收藏
页码：1001 / 1011
页数：10
相关论文
共 50 条
[1]  
Domblesky JP(1995)Application of the finite-element method to the radial forging of large diameter tubes J Mater Proces Tech 49 57-74
[2]  
Shivpuri R(1994)Application of analytical simulation to forged part design Toyota Tech Rev 43 22-27
[3]  
Painter B(1992)Application of the 2D finite element method to simulation of cold-forging process J Mater Process Technol 35 275-302
[4]  
Yano H(1998)Study of stress development in axisymmetric products processed by radial forging using a 3-D nonlinear finite element method J Mater Process Technol 74 74-88
[5]  
Akshi T(2007)Die design for the radial forging process using 3D FEM J Mater Process Technol 182 534-539
[6]  
Altan T(2010)Three-dimensional nonlinear finite element analysis of hot radial forging process for large diameter tubes Mater Manuf Process 25 669-678
[7]  
Knoerr M(1985)Closing of a central longitudinal pore in hot rolling J Mech Work Technol 12 233-242
[8]  
Jang DY(1978)Behavior of internal hollows in forging during open-die forging Stahl and Eigen 96 1004-1009
[9]  
Liou JH(1990)Analysis of void closure in open-die forging Int J Mach Tool Manuf 30 65-75
[10]  
Ghaei A(2002)Finite element simulations on void closure behavior inside the sheet during sheet rolling process Proc Ins Mech Eng 216 1227-1237
12345