Fire reaction properties of polystyrene-based nanocomposites using nanosilica and nanoclay as additives in cone calorimeter test

Using nanofiller additives in the polymer matrix to form nanocomposites is a potential way of reducing the flame spread and enhancing flame retardancy of polymeric materials during fire. To understand the fire reaction properties and the relative performance of flame-retardant additives in polymer during well-developed fire, neat polystyrene, polystyrene–silica and polystyrene–nanoclay (MMT) have been tested in a cone calorimeter. The neat polystyrene and the polystyrene nanocomposites have been prepared via an in situ polymerization method. An external heat flux of 50 kW m−2 was applied in the test, and parameters such as heat release rate, peak heat release rate, time to ignition, smoke toxicity, CO and CO2 yield have been investigated. Both neat polystyrene and polystyrene nanocomposites have shown the trend of a thermally thick charring polymer in the heat release rate over time data. The nanocomposites had an overall better flame retardancy than the neat polystyrene in terms of lower peak heat release rate, lower average mass loss rate and enhanced char formation. The nanocomposites had also reduced smoke emission with lower CO and CO2 yield compared to the neat polystyrene. The overall flame retardancy was enhanced as the nanofiller loading was increased for both the nanosilica and MMT nanocomposites.