Prediction method of impeller performance and analysis of loss mechanism for mixed-flow pump

被引：0

作者：

Hao Bing

Lei Tan

ShuLiang Cao

Li Lu

机构：

[1] Tsinghua University,State Key Laboratory of Hydroscience and Engineering

[2] Tsinghua University,State Key Laboratory of Tribology

[3] China Institute of Water Resources and Hydropower Research,Hydraulic Machinery Department

来源：

Science China Technological Sciences | 2012年 / 55卷

关键词：

mixed-flow pump; loss modeling; iterative calculation; performance prediction; loss mechanism;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A loss model for the mixed-flow pump impellers was developed by summarizing a variety of loss calculation formulas systematically. The internal flow field of the impeller was obtained by employing the iterative calculation for S1 and S2 stream surfaces to solve the continuity and motion equations of fluid. Based on the calculation method of the flow field and the loss model, it is achieved to predict the impeller performance of the mixed-flow pump and the performance curves of a mixed-flow pump model with adjustable blades. Compared with the test data, the loss model of the mixed-flow pump based on the iterative calculation can predict the impeller performance quickly and accurately, which has a high value on the engineering applications. Based on the test verification, curves of various kinds of losses varied for the flow rate were analyzed under different blade angles. In addition, the mechanisms of various kinds of losses inside the mixed-flow pump impeller were discussed in-depth.

引用

页码：1988 / 1998

页数：10

共 26 条

[1]

Kim J. H.(2010)High-efficiency design of a mixed-flow pump Sci China Tech Sci 53 24-27

[2]

Ahn H. J.(2008)Hydrodynamically detailed performance analysis of a mixed-flow water jet pump using computational fluid dynamics J Mech Eng Sci 222 1861-1867

[3]

Kim K. Y.(2010)Parametric design of a waterjet pump by means of inverse design, CFD calculations and experimental analyses J Fluids Eng 132 031104-226

[4]

Oh H. W.(1999)Optimum values of design variables versus specific speed for centrifugal pumps Proc Instn Mech Engrs Part A. J Power Energy 213 219-62

[5]

Yoon E. S.(1966)Losses in vaneless diffusers of centrifugal compressors and pumps. Analysis, experiment, and design Trans ASME, J Eng Power 88 49-9

[6]

Bonaiuti D.(1990)Off-design performance prediction of centrifugal pumps Fluid Machinery Components, ASME FED 101 1-338

[7]

Zangeneh M.(1997)An optimum set of loss models for performance prediction of centrifugal compressors Proc Instn Mech Engrs, Part A. J Power Energy 211 331-115

[8]

Aartojarvi R.(1998)Performance prediction of mixed-flow pumps Proc Instn Mech Engrs, Part A. J Power Energy 212 109-366

[9]

Oh H. W.(1995)Mean streamline aerodynamic performance analysis of centrifugal compressors Trans ASME, J Turbomach 117 360-1380

[10]

Chung M. K.(1952)A general theory of three-dimensional flow in subsonic and supersonic turbo machines of axial, radial and mixed-flow types Trans ASME 74 1363-281

← 1 2 3 →