Heat transfer at the stagnation point of a free-falling impinging liquid jet

被引:0
|
作者
A. I. Fedorchenko
F. Maršík
V. I. Terekhov
V. V. Terekhov
机构
[1] Institute of Thermomechanics CAS,
[2] Kutateladze Institute of Thermophysics SB RAS,undefined
来源
Thermophysics and Aeromechanics | 2022年 / 29卷
关键词
heat transfer; impinging liquid jet; self-similar solution; impulse jet;
D O I
暂无
中图分类号
学科分类号
摘要
The results of an analytical study of unsteady heat transfer in the vicinity of a stagnation point of an axisymmetric impinging liquid jet are presented. A self-similar solution is obtained, which allows the analysis of heat transfer behavior as a function of the Reynolds number, distance from the nozzle to the surface, and characteristic time. The behavior of the Nusselt number for the solution in asymptotically limiting cases is shown: the Froude number Fr ≫ 1 (small distances from the nozzle to the barrier) and Fr ≪ 1 (large distances). It is noted that the effect of the Froude number can be quite significant and should be taken into account when predicting heat transfer. Significant intensification of heat transfer is shown for a pulsed impinging jet at short pulse durations.
引用
收藏
页码:513 / 518
页数:5
相关论文
共 50 条
  • [41] Impinging sweeping jet and convective heat transfer on curved surfaces
    Kim, Dong Ju
    Jeong, Seyeong
    Park, Tongil
    Kim, Daegyoum
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2019, 79
  • [42] HEAT TRANSFER ANALYSIS OF AN IMPINGING SLOT JET ON A CONCAVE SURFACE
    Poitras, G. J.
    Babineau, A.
    Roy, G.
    Brizzi, L. -E.
    4TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, ASTFE 2019, 2019,
  • [43] Heat transfer from a flat surface to an inclined impinging jet
    M. Attalla
    M. Salem
    Heat and Mass Transfer, 2014, 50 : 915 - 922
  • [44] Effect of confinement on heat transfer characteristics of a microscale impinging jet
    Youn, Young Jik
    Choo, Kyosung
    Kim, Sung Jin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (1-3) : 366 - 373
  • [45] Oscillation and heat transfer in upward laminar impinging jet flows
    Shekhar, Chandra
    Nishino, Koichi
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2014, 50 : 316 - 329
  • [46] NUMERICAL STUDY OF JET IMPINGING ON A ROTATING CYLINDER WITH HEAT TRANSFER
    Hammami, Azzeddine
    Imine, Bachir
    Belkadi, Mustapha
    COMPUTATIONAL THERMAL SCIENCES, 2016, 8 (02): : 127 - 134
  • [47] Aerodynamic and heat transfer analysis of a impinging jet on a concave surface
    Poitras, G. J.
    Babineau, A.
    Roy, G.
    Brizzi, L. -E.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 114 : 184 - 195
  • [48] An experimental study on the flow and heat transfer of an impinging synthetic jet
    Xu, Yang
    Moon, Chanhee
    Wang, Jin-Jun
    Penyazkov, Oleg G.
    Kim, Kyung Chun
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 144
  • [49] The effect of nozzle height on cooling heat transfer from a hot steel plate by an impinging liquid jet
    Lee, PJ
    Choi, HW
    Lee, SH
    ISIJ INTERNATIONAL, 2004, 44 (04) : 704 - 709
  • [50] Prediction of critical heat flux for convective boiling of saturated water jet impinging on the stagnation zone
    Liu, ZH
    Zhu, QZ
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2002, 124 (06): : 1125 - 1130