Heat transfer at the stagnation point of a free-falling impinging liquid jet

被引:0
|
作者
A. I. Fedorchenko
F. Maršík
V. I. Terekhov
V. V. Terekhov
机构
[1] Institute of Thermomechanics CAS,
[2] Kutateladze Institute of Thermophysics SB RAS,undefined
来源
Thermophysics and Aeromechanics | 2022年 / 29卷
关键词
heat transfer; impinging liquid jet; self-similar solution; impulse jet;
D O I
暂无
中图分类号
学科分类号
摘要
The results of an analytical study of unsteady heat transfer in the vicinity of a stagnation point of an axisymmetric impinging liquid jet are presented. A self-similar solution is obtained, which allows the analysis of heat transfer behavior as a function of the Reynolds number, distance from the nozzle to the surface, and characteristic time. The behavior of the Nusselt number for the solution in asymptotically limiting cases is shown: the Froude number Fr ≫ 1 (small distances from the nozzle to the barrier) and Fr ≪ 1 (large distances). It is noted that the effect of the Froude number can be quite significant and should be taken into account when predicting heat transfer. Significant intensification of heat transfer is shown for a pulsed impinging jet at short pulse durations.
引用
收藏
页码:513 / 518
页数:5
相关论文
共 50 条
  • [31] Critical heat flux of steady boiling for saturated liquids jet impinging on the stagnation zone
    Qiu, YH
    Liu, ZH
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (21-22) : 4590 - 4597
  • [32] Study of flow and heat transfer characteristics of a liquid jet impinging on a heat sink with discontinuous staggered ring ribs
    Tang, Zhiguo
    Deng, Feng
    Zhao, Zhijian
    Cheng, Jianping
    Wang, Qingsheng
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 190
  • [33] Numerical simulation of convective heat transfer to a radial free surface jet impinging on a hot solid
    H. Fujimoto
    N. Hatta
    R. Viskanta
    Heat and Mass Transfer, 1999, 35 : 266 - 272
  • [34] Heat transfer characteristics of free nanofluid impinging jet on flat surface with different jet to plate distance: An experimental investigation
    Barewar, Surendra D.
    Tawri, Shravan
    Chougule, Sandesh S.
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2019, 136 : 1 - 10
  • [35] Effect of the Shape of Pulses on Heat Transfer at the Stagnation Point of a Nonstationary Axisymmetric Impact Gas–Droplet Jet
    M. A. Pakhomov
    V. I. Terekhov
    Journal of Engineering Physics and Thermophysics, 2022, 95 : 985 - 990
  • [36] Unsteady flow and heat transfer analysis of an impinging synthetic jet
    Farzad Bazdidi-Tehrani
    Mahdi Karami
    Mehdi Jahromi
    Heat and Mass Transfer, 2011, 47 : 1363 - 1373
  • [37] Heat Transfer and Fluid Flow Characteristics in a Swirling Impinging Jet
    Senda, Mamoru
    Inaoka, Kyoji
    Toyoda, Daisuke
    Sato, Soichi
    HEAT TRANSFER-ASIAN RESEARCH, 2005, 34 (05): : 324 - 335
  • [38] Numerical investigations of heat transfer from impinging annular jet
    Chattopadhyay, H
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (14-16) : 3197 - 3201
  • [39] FLUID FLOW AND HEAT TRANSFER IN A LAMINAR RADIAL IMPINGING JET
    Chakraborty, S.
    Sengupta, S. P.
    Biswas, G.
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 1994, 4 (01) : 173 - 185
  • [40] Supersonic Two-Phase Impinging Jet Heat Transfer
    Parker, Richard R.
    Klausner, James F.
    Mei, Renwei
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 135 (02):