Comparative Study on Using Ultrasonic Array-Based Techniques for Detection of Flaws in Thick and Attenuating Materials

This paper reports the influence of thickness and material attenuation on volumetric inspection using conventional and advanced ultrasonic array-based techniques through suitable examples. The sensitivity achieved in conventional phased array ultrasonic testing technique with focusing at specific depth using delay laws and advanced array-based techniques for simultaneous focusing at all depths such as Full Matrix Capture-Total Focusing Method and plane wave imaging-TFM are compared in the present study. Finally, experimental results are discussed for advanced ultrasonic array-based techniques for detection and characterization of a 4 mm through wall dimension vertical planar defect (simulating a lack of side wall fusion in a thick narrow gap weld) in a nickel base alloy forging having fine and coarse grains. The sensitivities and signal-to-noise ratio achieved in the different techniques are discussed in detail.