Optimization of processing parameters of medium density fiberboard using response surface methodology for multiwalled carbon nanotubes as a nanofiller

被引：0
作者：
Anuj Kumar
K. V. Sharma
Arun Gupta
Jan Tywoniak
Petr Hajek
机构：
[1] Czech Technical University in Prague,Faculty of Civil Engineering Department of Building Structures
[2] JNTUH College of Engineering,Centre for Energy Studies, Department of Mechanical Engineering
[3] Universiti Malaysia Pahang,Centre for Biocomposite and Innovative Materials, Faculty of Chemical & Natural Resources Engineering
[4] University Centre for Energy Efficient Buildings of Technical University in Prague,undefined
来源：
European Journal of Wood and Wood Products | 2017年 / 75卷
关键词：
Response Surface Methodology; Melamine; Formaldehyde Emission; Multiwalled Carbon Nanotubes; Wood Fiber;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In the present work, medium density fiberboard (MDF) panels were produced using multiwalled carbon nanotubes (MWCNT) reinforced urea formaldehyde resin. Response surface methodology was employed to optimize the relationship between the three variables, viz. pressing time, percentage of UF resin and percentage of MWCNT, used in the fabrication of MDF, and the influence of variables on the internal bonding (IB) and modulus of rupture (MOR) was studied. The optimum conditions based on the IB strength were determined as 8.18 % of UF resin, pressing time of 232 s, and MWCNT of 3.5 %. Similarly, the optimized conditions for MOR are also reported in this paper.
引用
收藏
页码：203 / 213
页数：10
相关论文
共 159 条
[1]  
Arepalli S(2004)Protocol for the characterization of single-wall carbon nanotube material quality Carbon 42 1783-475
[2]  
Nikolaev P(2010)Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water Bioinorg Chem Appl 2 456-611
[3]  
Gorelik O(1960)Some new three level design for the study of quantitative variables Technometrics 41 604-161
[4]  
Hadjiev V(2010)A study on the curing and viscoelastic characteristics of melamine-urea-formaldehyde adhesive in the presence of aluminum silicate nanoclays Compos Part A 64 155-334
[5]  
Holmes W(2014)Nano-engineered plywood panels: performance properties Compos B Eng 17 319-132
[6]  
Files B(2015)Physical and mechanical properties of nanoreinforced particleboard composites Maderas. Cienc y tecnol 90 126-273
[7]  
Yowell L(2016)Dynamic mechanical thermal analysis (DMTA) of cellulose nanofibril/nanoclay/pMDI nanocomposites Compos B Eng 51 267-1525
[8]  
Atieh MA(2013)Optimization of preparation conditions of soy flour adhesive for plywood by response surface methodology Ind Crops Prod 79 1522-1700
[9]  
Bakather OY(2006)Effect of aluminum oxide nanoparticles on the properties of urea-formaldehyde resin Russ J Appl Chem 58 1689-37
[10]  
Al-Tawbini B(1995)Differential scanning calorimetry and dynamic mechanical analysis of amine-modified urea–formaldehyde adhesives J Appl Polym Sci 49 33-1446
12345678910