Multiscale optimization of the viscoelastic behavior of short fiber reinforced composites

被引:0
作者
Julian Marr
Lukas Zartmann
Doris Reinel-Bitzer
Heiko Andrä
Ralf Müller
机构
[1] ZF Friedrichshafen AG,Research and Development
[2] Fraunhofer ITWM,Department of Flow and Material Simulation
[3] Technical University Darmstadt,Department of Continuum Mechanics
来源
International Journal of Mechanics and Materials in Design | 2023年 / 19卷
关键词
Short fiber reinforced composites; Viscoelasticity; FFT-based homogenization; Surrogate-based material optimization; Robust design;
D O I
暂无
中图分类号
学科分类号
摘要
In this paper, a multiscale optimization approach for composite material design is presented. The objective is to find different material designs for a short fiber reinforced polymer (SFRP) with a desired effective (in general anisotropic) viscoelastic behavior. The paper extends the work of Staub et al. (2012) and proposes a combination of material homogenization, surrogate modeling, parameter optimization and robustness analysis. A variety of microstructure design parameters including the fiber volume fraction, the fiber orientation distribution, the linear elastic fiber properties, and the temperature dependent material behavior are considered. For the solution of the structural optimization problem, a surrogate-based optimization framework is developed. The individual steps of that framework consist of using design of experiments (DoE) for the sampling of the constraint material design space, numerical homogenization for the creation of a material property database, a surrogate modeling approach for the interpolation of the single effective viscoelastic parameters and the use of differential evolution (DE) for optimization. In the numerical homogenization step, creep simulations on virtually created representative volume elements (RVEs) are performed and a fast Fourier transform (FFT)-based homogenization is used to obtain the effective viscoelastic material parameters. For every identified optimal design, the robustness is evaluated. The considered Kriging surrogate models of Kriging type have a high prediction accuracy. Numerical examples demonstrate the efficiency of the proposed approach in determining SFRPs with target viscoelastic behavior. An experimental validation shows a good agreement of the homogenization method with corresponding measurements. During the manufacturing of composite parts, the results of such optimizations allow a consideration of the local microstructure in order to achieve the desired macroscopic viscoelastic behavior.
引用
收藏
页码:501 / 519
页数:18
相关论文
共 50 条
  • [31] Effective viscoelastic behavior of short fibers composites using virtual DMA experiments
    Burgarella, Boris
    Maurel-Pantel, Aurelien
    Lahellec, Noel
    Bouvard, Jean-Luc
    Billon, Noelle
    Moulinec, Herve
    Lebon, Frederic
    MECHANICS OF TIME-DEPENDENT MATERIALS, 2019, 23 (03) : 337 - 360
  • [32] Effective viscoelastic behavior of short fibers composites using virtual DMA experiments
    Boris Burgarella
    Aurelien Maurel-Pantel
    Noël Lahellec
    Jean-Luc Bouvard
    Noëlle Billon
    Hervé Moulinec
    Frédéric Lebon
    Mechanics of Time-Dependent Materials, 2019, 23 : 337 - 360
  • [33] Measurements of fiber orientation and elastic-modulus analysis in short-fiber-reinforced composites
    Jung, SW
    Kim, SY
    Nam, HW
    Han, KS
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (01) : 107 - 116
  • [34] Prediction of the failure properties of short fiber reinforced composites with metal and polymer matrix
    Zhu, K
    Schmauder, S
    COMPUTATIONAL MATERIALS SCIENCE, 2003, 28 (3-4) : 743 - 748
  • [35] Experimental Characterization of Short Fiber-Reinforced Composites on the Mesoscale by Indentation Tests
    Rauter, Natalie
    Lammering, Rolf
    APPLIED COMPOSITE MATERIALS, 2021, 28 (05) : 1747 - 1765
  • [36] Experimental Characterization of Short Fiber-Reinforced Composites on the Mesoscale by Indentation Tests
    Natalie Rauter
    Rolf Lammering
    Applied Composite Materials, 2021, 28 : 1747 - 1765
  • [37] Viscoelastic behavior of softwood based on a multiscale computational homogenization
    Bengtsson, Rhodel
    Mousavi, Mahmoud
    Afshar, Reza
    Gamstedt, E. Kristofer
    MECHANICS OF MATERIALS, 2023, 179
  • [38] Modeling Study of the Creep Behavior of Carbon-Fiber-Reinforced Composites: A Review
    Katouzian, Mostafa
    Vlase, Sorin
    Marin, Marin
    Scutaru, Maria Luminita
    POLYMERS, 2023, 15 (01)
  • [39] Fatigue modeling of short fiber reinforced composites with ductile matrix under cyclic loading
    Kabir, M. R.
    Lutz, W.
    Zhu, K.
    Schmauder, S.
    COMPUTATIONAL MATERIALS SCIENCE, 2006, 36 (04) : 361 - 366
  • [40] Modeling and mesoscopic damage constitutive relation of brittle short-fiber-reinforced composites
    Hongqiu Liu
    Naigang Liang
    Mengfen Xia
    Science in China Series E: Technological Sciences, 1999, 42 : 530 - 540