Numerical Determination and Experimental Validation of a Technological Specimen Representative of High-Pressure Hydrogen Storage Vessels

被引：0
作者：
B. Gentilleau
F. Touchard
J.-C. Grandidier
D. Mellier
机构：
[1] Institut Pprime,
[2] CNRS-ENSMA-Université de Poitiers,undefined
[3] UPR 3346,undefined
[4] Département Physique et Mécanique des Matériaux –ENSMA,undefined
来源：
Mechanics of Composite Materials | 2015年 / 51卷
关键词：
carbon-fiber-reinforced polymer; finite-element analysis; digital image correlation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A technological specimen representative of type IV high-pressure hydrogen storage vessels is developed. An analytical model is used to compute fiber orientations in the specimen in order to be as representative as possible of the stress level reached in a tank during pressurization. A three-dimensional finite-element model is used to determine the best stacking sequence with these fiber orientations. A validation is done by performing tests with digital image correlation in order to measure displacements on the lateral side of the specimen. A comparison between the calculated and experimentally found strain fields is made. The results obtained highlight the influence of stacking sequence on the development of damage and the difficulty arising in designing representative specimens.
引用
收藏
页码：465 / 478
页数：13
相关论文
共 74 条
  • [11] Son DS(2008)Review of methodologies for composite material modelling incorporating failure Compos. Struct. 86 194-210
  • [12] Chang SH(2009)Plastic limit analysis of ductile composite structures from micro- to macro-mechanical analysis Acta Mechanica Solida Sinica 22 73-84
  • [13] Hong JH(2010)Recent developments on damage modeling and finite element analysis for composite laminates: A review Materials & Design 31 3825-3834
  • [14] Han MG(1982)Digital imaging techniques in experimental stress-analysis Optical Engineering 21 427-431
  • [15] Chang SH(1983)Enhanced displacement measurement using a generalized formulation for double-aperture specklegrams Experimental Mechanics 23 348-53
  • [16] Gentilleau B(2011)Notched behaviour of discontinuous carbon fiber composites: Comparison with quasi-isotropic non-crimp fabric Composites: Part A, Appl. Sci. and Manufact. 42 293-302
  • [17] Bertin M(2011)Experimental investigation of the delayed behaviour of unsaturated argillaceous rocks by means of digital image correlation techniques Appl. Clay Sci. 54 53-62
  • [18] Touchard F(2011)Localized deformation induced by heterogeneities in porous carbonate analysed by multi-scale digital image correlation Tectonophysics 503 100-116
  • [19] Grandidier J-C(2010)Multiscale full-field strain measurements for micromechanical investigations of the hydromechanical behaviour of clayey rocks Strain 46 33-46
  • [20] Dicken CJB(2006)In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in-situ SEM technique Materials Characterization 56 10-18
12345678