Linear adaptive controllers for robust high speed and acceleration motion control for delta robots

被引:0
作者
Ali Sharida
Iyad Hashlamon
机构
[1] Palestine Technical University,Electrical Engineering Department
[2] Palestine Polytechnic University,Mechanical Engineering Department
来源
International Journal of Dynamics and Control | 2022年 / 10卷
关键词
Delta robot; Linear control for robotics; Adaptive Kalman filter; Disturbance compensation; Disturbance observer;
D O I
暂无
中图分类号
学科分类号
摘要
This paper introduces a two-layer linear control approach to control highly nonlinear robots for high speed and adaptive tracking. The design of the control approach was based on the combination between the most common linear controllers (PID, Linear Quadratic Tracker, and State Feedback) and the principle of online disturbance estimation and rejection using adaptive Kalman filter algorithm. The inertia of the upper arms and the inertia of the motors were considered as the only known parameters, and the effects of all other nonlinear terms in the dynamic model were represented as a lumped disturbance vector. The paper also provides a comparative study between the proposed controllers and the traditional inverse dynamics nonlinear controllers. The results ensure the superiority of the proposed linear controllers in terms of adaptivity, steady-state error, and computational time. The results were validated experimentally using a lab-made delta robot prototype.
引用
收藏
页码:1567 / 1593
页数:26
相关论文
共 89 条
[1]  
Brinker J(2017)Comparative study of serial-parallel delta robots with full orientation capabilities IEEE Robot Autom Lett 2 920-926
[2]  
Funk N(2018)The milliDelta: a high-bandwidth, high-precision, millimeter-scale Delta robot Sci Robot 3 1-10
[3]  
Ingenlath P(2018)Vision guided parallel robot and its application for automated assembly task Adv Sci Technol Res J 12 150-157
[4]  
Takeda Y(2016)Laminated micro-machine: design and fabrication of a flexure-based Delta robot J Manuf Process 24 370-375
[5]  
Corves B(2019)Delta 3D printer: metal printing J Electr Eng Electron Control Comput Sci 5 19-24
[6]  
McClintock H(2013)Evolution of industrial robots and their applications Int J Emerg Technol Adv Eng 3 763-768
[7]  
Temel FZ(2016)Kinematic calibration of Delta robot using distance measurements Proc Inst Mech Eng C J Mech Eng Sci 230 414-424
[8]  
Doshi N(2017)Experimental and simulation studies of motion control of a Delta robot using a model-based approach Int J Adv Robot Syst 14 1-14
[9]  
Js K(2015)Multi-objective optimization of a parallel ankle rehabilitation robot using modified differential evolution algorithm Chin J Mech Eng 28 702-715
[10]  
Wood RJ(2019)Dynamic performance evaluation of a redundantly actuated and over-constrained parallel manipulator Int J Autom Comput 16 274-285