共 160 条
[1]
Zolotorevskiy V. S.(2014)Determining the hot cracking index of Al–Si–Cu–Mg casting alloys calculated using the effective solidification range Int. J. Cast Met. Res. 27 193-198
[2]
Pozdniakov A. V.(2012)Search for promising compositions for developing new multiphase casting alloys based on Al–Cu–Mg matrix using thermodynamic calculations and mathematic simulation Phys. Met. Metallogr. 113 1052-1060
[3]
Zolotorevskii V. S.(2004)Suyitno, and L. Katgerman, “Mechanical properties in the semi-solid state and hot tearing of aluminum alloys Prog. Mat. Sci. 49 629-711
[4]
Pozdnyakov A. V.(2016)Structure, phase composition, and strengthening of cast Al–Ca–Mg–Sc alloys Phys. Met. Metallogr. 117 188-194
[5]
Churyumov A. Yu.(2020)Effect of calcium and silicon on the character of solidification and strengthening of the Al–8% Zn–3% Mg alloy Phys. Met. Metallogr. 121 135-142
[6]
Eskin D. G.(2006)Microstructure and phase composition of Al–Ce–Cu alloys in the Al-rich corner Mater. Sci. Forum 519–521 395-400
[7]
Belov N. A.(2007)The ternary Al–Ce–Cu phase diagram in the aluminum-rich corner Acta Mater. 55 5473-5482
[8]
Naumova E. A.(2018)Microstructure and materials characterisation of the novel Al–Cu–Y alloy Mater. Sci. Technol. 34 1489-1496
[9]
Bazlova T. A.(2020)Comparative analysis of structure and properties of quasibinary Al–6.5Cu–2.3Y and Al–6Cu–4.05Er alloys Phys. Met. Metallogr. 121 476-482
[10]
Alekseeva E. V.(2019)Evolution of microstructure and mechanical properties of a new Al–Cu–Er wrought alloy Phys. Met. Metallogr. 120 614-619