Rice Husk Ash: Effective Reinforcement for Epoxy-Based Composites for Electronic Applications

被引：0
作者：
V. S. Darekar
M. G. Kulthe
A. Goyal
R. K. Goyal
机构：
[1] Malaviya National Institute of Technology Jaipur,Department of Metallurgical and Materials Engineering
[2] College of Engineering Pune,Department of Metallurgy and Materials Science
[3] Indian Institute of Technology Bombay,Department of Mechanical Engineering
来源：
Journal of Electronic Materials | 2024年 / 53卷
关键词：
Epoxy; rice husk ash; coefficient of thermal expansion; dielectric constant;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An agricultural waste-derived rice husk ash (RHA) as a source of silica was synthesized using a conventional low-cost method and subsequently used as a reinforcing agent to develop epoxy/RHA composites for microelectronic applications. The chemical composition and phase analysis of as-synthesized RHA was performed using x-ray fluorescence (XRF) spectroscopy and x-ray diffraction (XRD) techniques, respectively. The thermal, thermomechanical and dielectric properties of the epoxy/RHA composites were determined. The dispersion of RHA and the interfacial bonding between RHA and epoxy was studied using scanning electron microscopy (SEM). The addition of RHA in epoxy enhanced the glass transition temperature (Tg) of the composites significantly and all the composites showed better thermal stability than neat epoxy. The coefficient of thermal expansion (CTE) of the epoxy resin was reduced by 29.2% after the addition of 18.81 vol.% RHA. The storage modulus of epoxy/RHA composites was significantly enhanced up to 55.3% compared to neat epoxy. As compare to neat epoxy the composite with 18.81 vol.% RHA loading showed 44.7% improvement in microhardness. The dielectric constant of the epoxy decreased when the RHA was incorporated into it however epoxy/RHA composites exhibited insignificant change in dissipation factor compared to neat epoxy.
引用
收藏
页码：1344 / 1359
页数：15
相关论文
共 166 条
[1]  
Hossain SS(2018)Rice husk/rice husk ash as an alternative source of silica in ceramics: a review J. Asian Ceram. Soc. 6 299-undefined
[2]  
Mathur L(2017)Rice husk agricultural waste-derived low ionic content carbon–silica nanocomposite for green reinforced epoxy resin electronic packaging material J. Taiwan Inst. Chem. Eng. 78 493-undefined
[3]  
Roy PK(2018)Replacement of commercial silica by rice husk ash in epoxy composites: a comparative analysis Mat. Res. 21 e20160562-undefined
[4]  
Hsieh YY(2020)Explicit simultaneous enhancement of adhesion strength and wear resistance of functional value-added epoxy-functionalized rice husk ash nanoparticle composite coating Int. J. Adv. Manuf. Technol. 109 2205-undefined
[5]  
Tsai YC(2018)Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites Nanotechnol. Rev. 7 475-undefined
[6]  
He JR(2005)Glass transition temperature depression at the percolation threshold in carbon nanotube-epoxy resin and polypyrrole-epoxy resin composites Macromol. Rapid Commun. 26 390-undefined
[7]  
Yang PF(2009)Effect of boron carbide filler on the curing and mechanical properties of an epoxy resin J. Adhes. 85 216-undefined
[8]  
Lin HP(2014)Development of rice husk ash reinforced bismaleimide toughened epoxy nanocomposites Front. Chem. 2 65-undefined
[9]  
Hsu CH(2015)Development of halogen free flame retardant phosphazene and rice husk ash incorporated benzoxazine blended epoxy composites formicroelectronic applications New J. Chem. 39 6555-undefined
[10]  
Loganathan A(2021)A comparative study of mechanical, dynamic mechanical and thermal properties of rice husk ash, modified rice husk ash and nano silica filled epoxy composites Mater. Today Proc. 47 5351-undefined
12345678910