Effect of SnOx film on the bonding of titanium–porcelain

被引：1

作者：

Litong Guo

Xiaochen Liu

Zengying He

Jiqiang Gao

Jianfeng Yang

Tianwen Guo

机构：

[1] Xi’an Jiaotong University,State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science & Engineering

[2] The Fourth Military Medical University,Department of Prosthodentics, Affiliated Hospital of Stomatology, School of Medicine

[3] Zhejiang University,undefined

来源：

Journal of Sol-Gel Science and Technology | 2008年 / 47卷

关键词：

Coatings; Adhesion; Tin oxide film; Titanium; Dental material;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The SnOx film was deposited on titanium by sol–gel dipping process. After drying at 80 °C for 5 h, the films were treated for 10 min at different temperature. A thin and coherent SnOx film with small spherical pores obtained at 300 °C served as an effective oxygen diffusion barrier and improved titanium–porcelain adhesion. The SnOx film changed the fracture mode of the titanium–porcelain system and improved the mechanical and chemical bonding between porcelain and titanium, resulted in the increased bonding strength of titanium–porcelain.

引用

页码：239 / 242

页数：3

共 25 条

[1]

Lee KM(2004)undefined J Biomed Mater Res B 68 165-undefined

[2]

Cai Z(1996)undefined Quintess Int 27 401-undefined

[3]

Griggs JA(2002)undefined Biomaterials 23 1303-undefined

[4]

Guiatas L(1999)undefined J Biomed Mater Res 46 262-undefined

[5]

Lee DJ(2007)undefined Surf & Coat Technol 201 5637-undefined

[6]

Okabe T(1998)undefined J Biomed Mater Res 42 508-undefined

[7]

Wang RR(2005)undefined Dent Mater 21 773-undefined

[8]

Fenton A(2001)undefined Biomaterials 22 979-undefined

[9]

Fischer J(undefined)undefined undefined undefined undefined-undefined

[10]

Wang RR(undefined)undefined undefined undefined undefined-undefined

← 1 2 3 →