Residual stresses formation during the manufacturing process of epoxy matrix composites: resin yield stress and anisotropic chemical shrinkage

被引：0
作者：
Youssef Abou Msallem
Frédéric Jacquemin
Arnaud Poitou
机构：
[1] Centrale Nantes - Université de Nantes,GeM, UMR CNRS 6183
来源：
International Journal of Material Forming | 2010年 / 3卷
关键词：
Thermosetting resin; Residual stress; Yield stress; Homogenization; Effective composites properties; Chemical shrinkage;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A study of residual stresses during the curing process of thermosetting resin composites is presented. A methodology is proposed for predicting the formation and the development of the manufacturing residual stresses, this approach is based on the determination of the resin yield stress. A self-consistent model is used to determine the cure-dependent effective mechanical properties, thermal expansion and chemical shrinkage coefficients of the composite material. This model allows considering for the composite material behaviour an anisotropic chemical shrinkage, which is not represented by a classical linear model. Finally, a one dimensional cure simulation and a modelling of residual stresses formation in composite plate are made by using a finite elements code. The effects of the cure-dependent material properties and of the resin yield stress on the residual stress formation are studied.
引用
收藏
页码：1363 / 1372
页数：9
相关论文
共 18 条
  • [1] Boghetti TA(1992)Process-induced stress and deformation in thick-section thermoset composite laminates J Comp Mater 26 626-660
  • [2] Gillespie JW(1983)Three-dimensional curing stresses in symmetric cross-ply laminates with temperature-dependent properties J Comp Mater 17 449-463
  • [3] Griffin OH(1976)Residual stresses in polymer matrix composite laminates J Comp Mater 10 266-277
  • [4] Hahn HT(2005)Numerical analysis of cure temperature and internal residual stresses in thin and thick parts Compos Part A-Appl S 36 806-826
  • [5] Ruiz E(1998)Process-induced residual stresses analysis of AS4/3501-6 composite material Mech Compos Mater St 5 153-186
  • [6] Trochu F(1996)Determination of temperature variable properties of composite materials: methodology and experimental results J Reinf Plast Comp 15 480-496
  • [7] White SR(1958)Berechnung der elastischen Konstanten des Vielkristalls aus des Konstanten des Einkristalls Zeitschrift für Physik 15 504-518
  • [8] Kim YK(1957)The determination of the elastic field of an ellipsoidal inclusion and related problems Proc Roy Soc London A241 376-396
  • [9] Bailleul JL(1970)Elastic-plastic behaviour of polycrystalline metals and composites Proc Roy Soc London 319 247-272
  • [10] Delaunay D(2004)A hygro-elastic self-consistent model for fiber-reinforced composites J Reinf Plast Compos 5 485-502
12