Observation of the crystallization behavior of a slag containing 46 wt pct CaO, 46 wt pct SiO2, 6 wt pct Al2O3, and 2 wt pct Na2O using the double hot thermocouple technique

被引:0
|
作者
Christian Thales Mutale
Alan W. Cramb
Thomas Claudon
机构
[1] Carnegie Mellon University,the Center for Iron and Steelmaking Research, Materials Science & Engineering Department
[2] University Paul Verlaine,the Professional University Institute of Environmental Engineering
来源
Metallurgical and Materials Transactions B | 2005年 / 36卷
关键词
Calcium Silicate; Isothermal Crystallization; Iron Steel Inst; Critical Cool Rate; Sodium Oxide;
D O I
暂无
中图分类号
学科分类号
摘要
In this work, isothermal crystallization of a synthetic slag containing 46 wt pct CaO, 46 wt pct SiO2, 6 wt pct Al2O3, and 2 wt pct Na2O has been investigated by means of double hot thermocouple technique (DHTT). The effect of Na2O content on crystallization time was confirmed. Two different types of calcium silicate crystals were observed. Calcium di-silicate forms at temperatures above 1150 °C and calcium tri-silicate precipitate at temperatures below 1050 °C. A mixture of the two types of calcium silicate has been observed between the two temperatures. The tendency of crystals to become richer in calcium at low temperatures that has also been observed in previous published works has been confirmed. No effect of the cooling rate on crystallization start time was confirmed in the range of cooling rates applied in this investigation.
引用
收藏
页码:417 / 418
页数:1
相关论文
共 50 条
  • [11] Determination of Vanadium Solubility in the Al2O3-CaO(30 Mass Pct)-SiO2 and Al2O3-CaO(35 Mass Pct)-SiO2 System
    Lindvall, Mikael
    Du Sichen
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (02): : 733 - 740
  • [12] ELECTRONIC CONDUCTIVITIES OF COMMERCIAL ZRO2 + 3 TO 4 WT PCT CAO ELECTROLYTES
    FRIEDMAN, LM
    OBERG, KE
    BOORSTEI.WM
    RAPP, RA
    METALLURGICAL TRANSACTIONS, 1973, 4 (01): : 69 - 74
  • [13] Fabrication of Al-3 wt pct Mg matrix composites reinforced with Al2O3 and SiC particulates by the pressureless infiltration technique
    Lee, KB
    Kim, YS
    Kwon, H
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (12): : 3087 - 3095
  • [14] Fabrication of Al-3 Wt pct Mg matrix composites reinforced with Al2O3 and SiC particulates by the pressureless infiltration technique
    Kon Bae Lee
    Youn Su Kim
    Hoon Kwon
    Metallurgical and Materials Transactions A, 1998, 29 : 3087 - 3095
  • [15] Effects of CaO/SiO2 on Viscous Behaviors and Structure of CaO-SiO2-11.00wt%MgO-11.00wt%Al2O3-43.00wt%TiO2 Slag Systems
    Feng, Cong
    Tang, Jue
    Gao, Lihua
    Liu, Zhenggen
    Chu, Mansheng
    ISIJ INTERNATIONAL, 2019, 59 (01) : 31 - 38
  • [16] The viscous behavior and potassium removal capacity of CaO-SiO2-8wt%MgO-17wt%Al2O3-2.5wt%BaO-K2O slag
    Liu, Wenguo
    Xing, Xiangdong
    Zuo, Haibin
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 117 (02)
  • [17] Effect of the CaO/SiO2 mass ratio and FeO content on the viscosity of CaO–SiO2–“FeO”–12wt%ZnO–3wt%Al2O3 slags
    Jian-fang Lü
    Zhe-nan Jin
    Hong-ying Yang
    Lin-lin Tong
    Guo-bao Chen
    Fa-xin Xiao
    International Journal of Minerals, Metallurgy, and Materials, 2017, 24 : 756 - 767
  • [18] Effect of Sintering Temperature on Dielectric Properties of 72 wt%(Al2O3):28 wt%(SiO2) Ceramics
    Sahu, Manisha
    Panigrahi, Basanta Kumar
    Kim, Hoe Joon
    Deepti, P. L.
    Hajra, Sugato
    Mohanta, Kalyani
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2020, 30 (10): : 495 - 501
  • [19] Effect of the CaO/SiO2 mass ratio and FeO content on the viscosity of CaO–SiO2–“FeO”–12wt%ZnO–3wt%Al2O3 slags
    Jian-fang Lü
    Zhe-nan Jin
    Hong-ying Yang
    Lin-lin Tong
    Guo-bao Chen
    Fa-xin Xiao
    International Journal of Minerals Metallurgy and Materials, 2017, 24 (07) : 756 - 767
  • [20] Influence of Phase Constitution on Mechanical Performance of 12Ce-3Y-ZrO2/2.5 wt pct Al2O3 Composites
    J.Vleugels
    O.V.D.Biest
    JournalofMaterialsScience&Technology, 2004, (03) : 284 - 286