Relationships Between the Ultimate Strengths of Polymer Composites in Static Bending, Compression, and Tension

被引：0
|
作者：
A. V. Kondratiev
V. E Gaidachuk
M. E. Kharchenko
机构：
[1] National Aerospace University “Kharkiv Aviation Institute,
[2] ООО “АV-TEK”,undefined
来源：
Mechanics of Composite Materials | 2019年 / 55卷
关键词：
polymer composite materials; compressive; tensile; and bending strengths; mathematical models;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Relationships between the ultimate static bending, compressive and tensile strengths of polymer composite materials are investigated. Validity of the assumptions used in various models of relationship between the ultimate strengths is analyzed for a number of composite materials. The results obtained allow one, with an accuracy acceptable at the initial stages of design of composite structures, to determine their ultimate compressive strength from results of simple tests on material specimens in tension and three-point bending or from known values of the corresponding strengths.
引用
收藏
页码：259 / 266
页数：7
相关论文
共 42 条
  • [31] Rational relationship between the fatigue curves of asphalt mixes obtained from tension/compression and 4-point bending tests
    Di Benedetto, Herve
    Perraton, Daniel
    Lamothe, Sebastien
    Boussabnia, Mohamed Mounir
    ROAD MATERIALS AND PAVEMENT DESIGN, 2023, 24 (S1) : 192 - 208
  • [32] Correction to: High-entropy CoCrFeMnNi alloy/aluminide-laminated composites with enhanced quasi-static bending and dynamic compression properties
    Yu Wang
    Xiangfei Peng
    Ahmed M. Fallatah
    Hongxin Qin
    Wenjuan Zhao
    Zaki I. Zaki
    Hong Xu
    Bin Liu
    Hongkui Mao
    Zeinhom M. El-Bahy
    Hassan Algadi
    Chao Wang
    Advanced Composites and Hybrid Materials, 2024, 7
  • [33] Reducing Yield Asymmetry between Tension and Compression by Fabricating ZK60/WE43 Bimetal Composites
    Zhao, Kangning
    Xu, Dexing
    Song, Xiao
    Ma, Yingzhong
    Li, Hongxiang
    Zhang, Jishan
    Chen, Daolun
    MATERIALS, 2020, 13 (01)
  • [34] RELATIONSHIPS BETWEEN THE SURFACE FREE-ENERGIES AND SURFACE CHEMICAL-COMPOSITIONS OF THERMOPLASTIC FIBER COMPOSITES AND ADHESIVE JOINT STRENGTHS
    KINLOCH, AJ
    KODOKIAN, GKA
    WATTS, JF
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1991, 10 (14) : 815 - 818
  • [35] Orientation relationships between phases arising during compression testing in ZrO2-TRIP-steel composites
    Martin, S. (stefan.martin@iww.tu-freiberg.de), 1600, Elsevier Ltd (577):
  • [36] Orientation relationships between phases arising during compression testing in ZrO2-TRIP-steel composites
    Martin, S.
    Richter, S.
    Poklad, A.
    Berek, H.
    Decker, S.
    Martin, U.
    Krueger, L.
    Rafaja, D.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : S578 - S582
  • [37] Effects of low temperature on the mechanical properties of glass fibre-epoxy composites: static tension, compression, R=0.1 and R =-1 fatigue of ±45° laminates
    Cormier, Laurent
    Joncas, Simon
    Nijssen, Rogier P. L.
    WIND ENERGY, 2016, 19 (06) : 1023 - 1041
  • [38] Fully-reversed tension-compression fatigue of 2D and 3D woven polymer matrix composites at elevated temperature
    Ruggles-Wrenn, M. B.
    Alnatifat, S. A.
    POLYMER TESTING, 2021, 97
  • [39] High-entropy CoCrFeMnNi alloy/aluminide-laminated composites with enhanced quasi-static bending and dynamic compression properties (vol 6, 201, 2023)
    Wang, Yu
    Peng, Xiangfei
    Fallatah, Ahmed M.
    Qin, Hongxin
    Zhao, Wenjuan
    Zaki, Zaki I.
    Xu, Hong
    Liu, Bin
    Mao, Hongkui
    El-Bahy, Zeinhom M.
    Algadi, Hassan
    Wang, Chao
    ADVANCED COMPOSITES AND HYBRID MATERIALS, 2024, 7 (01)
  • [40] A comparison between the permittivity and electric modulus representations of the microwave response of carbon black loaded polymer composites under uniaxial tension
    Belattar, J.
    Achour, M. E.
    Brosseau, C.
    JOURNAL OF APPLIED PHYSICS, 2011, 110 (05)
12345