Experimental study on the effect of cyclic preloading on the resistance to liquefaction of saturated loose sand under wave loading

被引:1
|
作者
Zhang Z.-D. [1 ,2 ,3 ]
Luan M.-T. [1 ,2 ]
Jin D. [1 ,2 ]
Guo Y. [1 ,2 ]
Nie Y. [1 ,2 ]
机构
[1] State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Liaoning
[2] Institute of Geotechnical Engineering, School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, Liaoning
[3] Department of Civil Engineering, Huaihai Institute of Technology, Lianyungang 222005, Jiangsu
基金
中国国家自然科学基金;
关键词
Continuous rotation in the principal stress direction; Cyclic preloading; Liquefaction; Saturated sand; Second loading; Void ratio;
D O I
10.1007/s12204-009-0398-3
中图分类号
学科分类号
摘要
By using the soil static and dynamic universal triaxial and torsional shear apparatus, a series of combined cyclic shear tests are performed to simulate the rotation in the principal stress direction induced by ocean wave. The tests include the cyclic preloading tests and liquefaction tests in the second loading on saturated loose sand with a relative density of 30%. The all tests are consolidated under isotropic condition. The effect of the cyclic preloading on the resistance to liquefaction of saturated loose sands under the condition of continuous rotation in the principal stress direction is investigated. Experimental data indicate that the void ratio of saturated sands has a negligible reduction after cyclic preloading. With the increase of the intensity of cyclic preloading (in the amplitude and in the number of cycles), the resistance to liquefaction in the second loading is increased continuously under the condition that the liquefaction does not occur during the cyclic preloading. The reason is that the construction of more stable structure due to the uniformity of the void and the better interlocking of the particles when the cyclic preloading is applied to the saturated sand.
引用
收藏
页码:398 / 403
页数:5
相关论文
共 50 条
  • [21] Monotonic Preloading Effect on the Liquefaction Resistance of Chlef Silty Sand: a Laboratory Study
    A. Arab
    M. Sadek
    M. Belkhatir
    I. Shahrour
    Arabian Journal for Science and Engineering, 2014, 39 : 685 - 694
  • [22] Liquefaction and cyclic failure of sand under bidirectional cyclic loading
    Jin, Dan
    Luan, Mao-Tian
    Li, Cheng
    Electronic Journal of Geotechnical Engineering, 2008, 13 G
  • [23] Fines Content and Cyclic Preloading Effect on Liquefaction Potential of Silty Sand: A Laboratory Study
    Arab, Ahmed
    Belkhatir, Mostefa
    ACTA POLYTECHNICA HUNGARICA, 2012, 9 (04) : 47 - 64
  • [24] SOME ASPECTS OF SAND LIQUEFACTION UNDER CYCLIC LOADING
    SEED, HB
    MARINE SCIENCE COMMUNICATIONS, 1978, 4 (04): : 375 - 392
  • [25] LIQUEFACTION OF SAND UNDER BIDIRECTIONAL MONOTONIC AND CYCLIC LOADING
    BOULANGER, RW
    SEED, RB
    JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1995, 121 (12): : 870 - 878
  • [26] EXPERIMENTAL STUDY ON THE DYNAMIC SHEAR MODULUS AND DAMPING RATIO OF SATURATED SAND UNDER CYCLIC LOADING
    Zhang, Jian
    Cao, Jiuting
    Huang, Sijie
    Shi, Baocun
    MATERIALI IN TEHNOLOGIJE, 2021, 55 (05): : 741 - 749
  • [27] Experimental study on constitutive relation of laterally constrained saturated sand under cyclic compressive loading
    Lu, X.
    Tan, Q.
    Yu, S.
    Zheng, Z.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2001, 20 (06): : 859 - 863
  • [28] Influence of cyclic loading frequency on liquefaction behaviors of saturated coral sand
    Yang Zheng-tao
    Qin You
    Wu Qi
    Chen Guo-xing
    ROCK AND SOIL MECHANICS, 2023, 44 (09) : 2648 - 2656
  • [29] Effects of cyclic loading directions on liquefaction characteristics of saturated coral sand
    Liu Kang
    Chen Guo-xing
    Wu Qi
    Ma Wei-jia
    Qin You
    ROCK AND SOIL MECHANICS, 2021, 42 (07) : 1951 - 1960
  • [30] Liquefaction and displacement of saturated sand under vertical vibration loading
    Lu, Xiaobing
    Tan, Qingming
    Cheng, C.M.
    Yu, Shanbing
    Cui, Peng
    Acta Mechanica Sinica/Lixue Xuebao, 2004, 20 (01): : 96 - 105