Structure and Mechanical Properties of Austenitic Stainless Steel Prepared by Selective Laser Melting

[1] Kablov E. N.(2017)“Present and future of additive technologies Metally Evrazii, No. 1 2-6

[2] Zhang B.(2013)The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder Mater. Sci. Eng., A 584 21-31

[3] Dembinski Lu.(2018)Features of the structure and properties of alloys based on the Ni Zharoprochnye Splavy i Stali, No. 12 25-36

[4] Goddet C.(2019)Al intermetallic compound obtained by the SLS method,” Trudy VIAM Zharoprochnye Splavy i Stali, No. 3 3-13

[5] Evgenov A. G.(2019)“Investigation of the microstructure and properties of corrosion-resistant steel of the Fe–Cr–Ni system obtained by selective laser alloying,” Trudy VIAM Phys. Met. Metallogr. 120 1109-1114

[6] Bazyleva O. A.(2019)Structure formation and properties of eutectic silumin obtained using selective laser melting Phys. Met. Metallogr. 120 1172-1179

[7] Golovlev N. A.(2016)Analysis of structure and mechanical properties of Co–Cr–Mo alloy obtained by 3D printing Mashinostroenie, No. 5 117-127

[8] Zaitsev D. V.(1950)“Processes of recrystallization in austenitic alloy obtained by methods of selective laser melting,” Vestnik MGTU Im. N.E. Baumana, Ser Mekhanika 4 108-119

[9] Bogachev I. A.(2016)Studies of the mechanical properties of materials at high loading rates Phys. Met. Metallogr. 117 875-884

[10] Sul’yanova E. A.(undefined)Martensitic transformations and the evolution of the defect microstructure of metastable austenitic steel during severe plastic deformation by high-pressure torsion undefined undefined undefined-undefined

[1] Kablov E. N.(2017)“Present and future of additive technologies Metally Evrazii, No. 1 2-6

[2] Zhang B.(2013)The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder Mater. Sci. Eng., A 584 21-31

[3] Dembinski Lu.(2018)Features of the structure and properties of alloys based on the Ni Zharoprochnye Splavy i Stali, No. 12 25-36

[4] Goddet C.(2019)Al intermetallic compound obtained by the SLS method,” Trudy VIAM Zharoprochnye Splavy i Stali, No. 3 3-13

[5] Evgenov A. G.(2019)“Investigation of the microstructure and properties of corrosion-resistant steel of the Fe–Cr–Ni system obtained by selective laser alloying,” Trudy VIAM Phys. Met. Metallogr. 120 1109-1114

[6] Bazyleva O. A.(2019)Structure formation and properties of eutectic silumin obtained using selective laser melting Phys. Met. Metallogr. 120 1172-1179

[7] Golovlev N. A.(2016)Analysis of structure and mechanical properties of Co–Cr–Mo alloy obtained by 3D printing Mashinostroenie, No. 5 117-127

[8] Zaitsev D. V.(1950)“Processes of recrystallization in austenitic alloy obtained by methods of selective laser melting,” Vestnik MGTU Im. N.E. Baumana, Ser Mekhanika 4 108-119

[9] Bogachev I. A.(2016)Studies of the mechanical properties of materials at high loading rates Phys. Met. Metallogr. 117 875-884

[10] Sul’yanova E. A.(undefined)Martensitic transformations and the evolution of the defect microstructure of metastable austenitic steel during severe plastic deformation by high-pressure torsion undefined undefined undefined-undefined