Cu(Zn,Sn)(S,Se)2 Solar Cells with a Nanocomposite Window Layer Produced by Totally Nonvacuum Methods

被引：2

作者：

Thi Thu Hien Nguyen ^{[1
,4
]}

Anh Tuan Pham ^{[4
]}

Duc Huy Tran ^{[2
]}

Viet Anh Dung Dang ^{[3
]}

Ngoc Phan Vu ^{[1
]}

Huu Dung Nguyen ^{[1
]}

Thanh Tung Duong ^{[1
]}

Duy Cuong Nguyen ^{[1
]}

机构：

[1] Hanoi Univ Sci & Technol, Adv Inst Sci & Technol, Nano Optoelect Lab, 1 Dai Co Viet, Hanoi, Vietnam

[2] Hanoi Univ Sci & Technol, Sch Mat Sci & Engn, 1 Dai Co Viet, Hanoi, Vietnam

[3] Hanoi Univ Sci & Technol, Sch Chem Engn, 1 Dai Co Viet, Hanoi, Vietnam

[4] Elect Power Univ, Fac Power Syst, 235 Hoang Quoc Viet Str, Hanoi, Vietnam

来源：

JOURNAL OF ELECTRONIC MATERIALS | 2019年 / 48卷 / 09期

关键词：

CZTSSe solar cells; nanocomposite; Ag nanowire; ITO nanoparticles; nonvacuum methods; TRANSPARENT; FABRICATION; FILMS;

D O I：

10.1007/s11664-019-07147-0

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The authors report the optical and electrical properties of nanocomposite films of Ag-nanowires (Ag-NWs) and indium-tin oxide nanoparticles (ITO-NPs) and their application in window electrodes in solar cells. We found that the electrical and optical properties of Ag-NWs/ITO-NPs nanocomposite films strongly depend on the thickness. Nanocomposite film with 1000nm thickness was observed to be most suitable for application as window electrodes in Cu(Zn,Sn)(S,Se)(2) solar cells. The parameters of the cell using a 1000nm-thick nanocomposite window electrode are short-circuit current density of 24.2mA/cm(2), open-circuit voltage of 0.32V, fill factor of 0.44, and conversion efficiency of 3.37%. The results demonstrated an economical pathway for fabricating solar cells without vacuum methods.

引用

页码：5555 / 5561

页数：7

共 24 条

[1]

[Anonymous], 1974, MAT RES B, V9, P645

[2] Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: First-principles insights [J].