Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA

被引：116
|
作者：
Bhattacharya A. [1 ]
Das S. [2 ]
Majumder P. [2 ]
Batish A. [1 ]
机构：
[1] Mechanical Engineering Department, Thapar University
[2] Mechanical Engineering Department, Kalyani Government Engineering College
来源：
Production Engineering | 2009年 / 3卷 / 01期
关键词：
ANOVA; High speed machining; Power consumption; Surface roughness; Taguchi design;
D O I：
10.1007/s11740-008-0132-2
中图分类号：
学科分类号：
摘要：
The present paper outlines an experimental study to investigate the effects of cutting parameters on finish and power consumption by employing Taguchi techniques. The high speed machining of AISI 1045 using coated carbide tools was investigated. A combined technique using orthogonal array and analysis of variance was employed to investigate the contribution and effects of cutting speed, feed rate and depth of cut on three surface roughness parameters and power consumption. The results showed a significant effect of cutting speed on the surface roughness and power consumption, while the other parameters did not substantially affect the responses. Thereafter, optimal cutting parameters were obtained. © German Academic Society for Production Engineering (WGP) 2008.
引用
收藏
页码：31 / 40
页数：9
相关论文
共 50 条
  • [21] Investigation on Effect of Machining Parameters of End Milling on Surface Finish and Temperature Using Taguchi Technique
    Tamiloli, N.
    Venkatesan, J.
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2016, 16 (04) : 255 - 261
  • [22] Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel
    Peng, Zhenlong
    Zhang, Xiangyu
    Zhang, Deyuan
    ULTRASONICS, 2021, 111
  • [23] Optimization of WEDM parameters using Taguchi technique and Response Surface Methodology in machining of AISI D2 Steel
    Singh, Vikram
    Pradhan, S. K.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1597 - 1608
  • [24] On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel
    Gu Liyao
    Wang Minjie
    Duan Chunzheng
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 75 : 288 - 298
  • [25] Optimization of Cutting Parameters using Cryogenically Treated High Speed Steel Tool by Taguchi Application
    Singh, Lakhwinder Pal
    Singh, Jagtar
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2013, 3 (01) : 26 - 38
  • [26] A comparative study on the surface finish achieved during face milling of AISI 1045 steel components using eco-friendly cutting fluids in near dry condition
    Dennison M.S.
    Meji M.A.
    Nelson A.J.R.
    Balakumar S.
    Prasath K.
    International Journal of Machining and Machinability of Materials, 2019, 21 (5-6) : 337 - 356
  • [27] Modeling and Optimization of Cutting Parameters during Machining of Austenitic Stainless Steel AISI304 Using RSM and Desirability Approach
    Boucherit, Septi
    Berkani, Sofiane
    Yallese, Mohamed Athmane
    Khettabi, Riad
    Mabrouki, Tarek
    PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2021, 65 (01): : 10 - 26
  • [28] Optimization of cutting parameters for surface roughness in turning of studs manufactured from AISI 5140 steel using the Taguchi method
    Kahraman, Funda
    MATERIALS TESTING, 2017, 59 (01) : 77 - 80
  • [29] CONSIDERATION OF STEP-OVER RATIO IN OPTIMISATION OF CUTTING PARAMETERS FOR SURFACE ROUGHNESS DURING HIGH SPEED MACHINING
    Hamamci, M.
    Topal, E. S.
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2015, 21 (04): : 753 - 766
  • [30] Effect of Tool Vibration on Flank Wear and Surface Roughness During High-Speed Machining of 1040 Steel
    Swain, Samarjit
    Panigrahi, Isham
    Sahoo, Ashok Kumar
    Panda, Amlana
    Kumar, Ramanuj
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2020, 20 (03) : 976 - 994
12345